Премини към съдържанието

mimo

Потребител
  • Публикации

    53
  • Регистрация

  • Последно онлайн

Харесвания

0 Неутрална репутация

Всичко за mimo

  • Титла
    Редовен потребител
  • Рожден ден 26.10.1989

Информация

  • Град
    Силистра

Контакти

  • ICQ
    85282288
  • Интернет сайт
    http://mimo.my.contact.bg/
  1. mimo

    Как се конвертира от NTFS към FAT32 ?

    Абе исакм да мина на фат 32 понеже имам желание на си ъпграитна биоса! Special Note: The BIOS and DEVICE DRIVERS contained here are exclusively for Micro-Star products only. Micro-Star assumes no responsibility for any damages resulting from improper use or lack of technical expertise. WARNING!!!!! DON'T FLASH FROM A FLOPPY DISK!!!! DON'T FLASH WHEN YOUR SYSTEM IS RUNNING FINE!!!! DON'T FLASH IF YOU DON'T KNOW WHAT YOU ARE DOING!!!! Award BIOS Flash Procedure (Special Thanks to Forum Moderator Bas for his valuable contribution) 1. Check your BIOS for BIOS FLASH DISABLED and ENABLE it, some boards have this function. For Example: K7N420 Pro (MS-6373) – BIOS setup/Integrated Peripherals/BIOS Protect/Disabled 2. Know Your model number a. Open your case and look for the MS-XXXX number on the motherboard between the PCI slots, also check the version number that is written there as well. (some motherboards are named like K7T Turbo, make sure you have the right version number) b. Boot up your system & take a look at the top left screen during POST, you should see something like “W6373MS v2.1 122101” This means the board is MS-6373 with BIOS version 2.1 Hint: Many systems are clearing this message very fast, the bios version is then unreadable, you can either press “PAUSE” or disable the “Quick Boot” in the BIOS setup. 3. Download the BIOS that matches your motherboard AND version number (some motherboards are named like K7T Turbo, make sure you have the right version number). BIOS can be found according to the CPU type of your board like if your CPU is Intel P4 478 type then look here http://www.msi.com.tw/support/bios/socket_478.php if you cannot find the BIOS that matches your board, try here http://www.msi.com.tw/support/bios/more.php 4. Extract the BIOS-archive that you have downloaded by double clicking to c:\test 5. Boot your system from a Win98 or WinME boot-floppy. How to make boot floppy in case your don’t have it ready: For Win9X, You can type [C:\ format a:/s] from the DOS prompt. For WinMe, You can make a boot floppy from control panel--> add/remove program-->make boot floppy. Remove autoexec.bat & config.sys file if there's any. For Win2000, there's no way to make boot floppy, so you have to either use Win9X or WinME boot floppy. For WinXP, you can make a DOS boot disk. Go to Your Computer, right click drive A:, select Format, select copy system files. 7. When you get the A:\ prompt, type the following sequence: C: <enter> cd\test <enter> C:\test> awdfl783m BIOS file (to save or not to save old BIOS is the user’s decision) 8. Reboot your system when prompted P.S. If your system doesn't boot after you flashed, please refer to the BIOS recovery method as described http://www.msi.com.tw/support/bios/note.htm AMI BIOS Flash Procedure (Special Thanks to Forum Moderator Bas for his valuable contribution) 1. Check your BIOS for BIOS FLASH DISABLED and ENABLE it, some boards have this function. For Example: K7T266 Pro (MS-6380) –BIOS setup/chipset setup/BIOS protection/disabled 2. Know Your model number a. Open your case and look for the MS-XXXX number on the motherboard between the PCI slots, also check the version number that is written there as well. (some motherboards are named like K7T Turbo, make sure you have the right version number) b. Boot up your system & take a look at the top left screen during POST, you should see something like “A6380MS v1.7 122101” This means the board is MS-6380 with BIOS version 1.7 Hint: Many systems are clearing this message very fast, the bios version is then unreadable, you can either press “PAUSE” or disable the “Quick Boot” in the BIOS setup. 3. Download the BIOS that matches your motherboard AND version number (some motherboards are named like K7T Turbo, make sure you have the right version number). BIOS can be found according to the CPU type of your board like if your CPU is Intel P4 478 type then look here http://www.msi.com.tw/support/bios/socket_478.php if you cannot find the BIOS that matches your board, try here http://www.msi.com.tw/support/bios/more.php 4. Extract the BIOS-archive that you have downloaded by double clicking to c:\test 5. Boot your system from a Win98 or WinME boot-floppy. How to make boot floppy in case your don’t have it ready: For Win9X, You can type [C:\ format a:/s] from the DOS prompt. For WinMe, You can make a boot floppy from control panel--> add/remove program-->make boot floppy. Remove autoexec.bat & config.sys file if there's any. For Win2000, there's no way to make boot floppy, so you have to either use Win9X or WinME boot floppy. For WinXP, you can make a DOS boot disk. Go to Your Computer, right click drive A:, select Format, select copy system files. 7. When you get the A:\ prompt, type the following sequence: C: <enter> cd\test <enter> C:\test> amifl827 BIOS file (to save or not to save old BIOS is the user’s decision) 8. Reboot your system when prompted P.S. If your system doesn't boot after you flashed, please refer to the BIOS recovery method as described http://www.msi.com.tw/support/bios/note.htm
  2. mimo

    Как да обновя BIOS (merged)

    Можели без да плащам на фирмата пройзведител на биоса ми, да си го обновя! Eто и спецификацията! Благодаря!
  3. Благодаря на всички! Тръгна старата машина!
  4. Ето модела на дъното: PCCHIPS M571 Намерих това:
  5. Търся дайвър за видео карта! Никъде по картата (тя в вградена в дънната платка) не пише за самата марка и модел! Пускам евереста и пише: sis integrated video! Не пише нищо по- конкретно! Помагайте...
  6. Търся информация за Нептун, Плутон, НОВАТА 10 ПЛАНЕТА И ИНФОРМАЦИЯ ЗА ЧЕРНИТЕ ДУПКИ!
  7. mimo

    Разкодиране на 6680

    Не може да не може да се разкодира! виш тази тема!
  8. mimo

    Разкодиране на 6680

    Може ли и къде да се разкодира нокиа 6680!!!!! Спешно!
  9. Готово! Подкарах ги и двете устройства! Мерси на всички!
  10. Абе пич какво са Джъмпери
  11. Не става нищо местих кабелите пробвах всички комбинаций! Може би кабелът ми да не е подходящ! Какъв трябва да бъде! И нещо важно! Имам две писалки cd и dvd! А не двд ром!
  12. Абе не е само двд ром, но и двд писалка! Ей сега ще пробвам!
  13. Не ства! Вързвам си отделно харда ( със сния кабел ID1) и с другия кабел сварзвам останалите две устройства! Самата ми подредба на устройствата са: Когато вържа първо сонито и после лг-то виндовса ми открива самом сонито! От биоса когата дам детект ми открива само сонито!
  • Разглеждащи това в момента   0 потребители

    Няма регистрирани потребители разглеждащи тази страница.

×

Информация

Поставихме бисквитки на устройството ви за най-добро потребителско изживяване. Можете да промените настройките си за бисквитки, или в противен случай приемаме, че сте съгласни с нашите условия за ползване.