Премини към съдържанието
_HAKERA_

Проблем с кардрийдъра

Препоръчан отговор


Здравейте,

Става дума за лаптоп с вграден кардрийдър.

Преди няколко дена вкл сд картата от фотоапарата и не я разчита.

Рестартирах и превключих на windows, всичко си беше наред, свалих си снимките и обърнах пак на линукс (при правилно спряна карта).

Днес пак опитвам да си сваля нови снимки и не откъсва. На 3-то или 4-то изваждане и

вкарване на картата системата я зачете.

Ето какво има в dmesg:

http://paste.debian.net/14842/

Сподели този отговор


Линк към този отговор
Сподели в други сайтове

root@ubuntu:~# lspci -n 00:00.0 0600: 8086:2a00 (rev 03) 00:01.0 0604: 8086:2a01 (rev 03) 00:1a.0 0c03: 8086:2834 (rev 03) 00:1a.1 0c03: 8086:2835 (rev 03) 00:1a.7 0c03: 8086:283a (rev 03) 00:1b.0 0403: 8086:284b (rev 03) 00:1c.0 0604: 8086:283f (rev 03) 00:1c.1 0604: 8086:2841 (rev 03) 00:1c.2 0604: 8086:2843 (rev 03) 00:1c.5 0604: 8086:2849 (rev 03) 00:1d.0 0c03: 8086:2830 (rev 03) 00:1d.1 0c03: 8086:2831 (rev 03) 00:1d.2 0c03: 8086:2832 (rev 03) 00:1d.7 0c03: 8086:2836 (rev 03) 00:1e.0 0604: 8086:2448 (rev f3) 00:1f.0 0601: 8086:2815 (rev 03) 00:1f.1 0101: 8086:2850 (rev 03) 00:1f.2 0101: 8086:2828 (rev 03) 00:1f.3 0c05: 8086:283e (rev 03) 01:00.0 0300: 10de:0428 (rev a1) 02:00.0 0200: 168c:001c (rev 01) 06:00.0 0106: 197b:2360 (rev 02) 07:00.0 0200: 11ab:4353 (rev 14) 08:01.0 0c00: 1180:0832 08:01.1 0805: 1180:0822 (rev 19) 08:01.2 0880: 1180:0592 (rev 0a) root@ubuntu:~#  

Сподели този отговор


Линк към този отговор
Сподели в други сайтове

Linux ubuntu 3.8.0-23-generic #34-Ubuntu SMP Wed May 29 20:24:54 UTC 2013 i686 i686 i686 GNU/Linux

 

Като сега имам това:  http://i41.tinypic.com/k0ljqc.png

Ама смея ли да се съглася :)


Сподели този отговор


Линк към този отговор
Сподели в други сайтове

Добре ядрото е сравниелно ново.Но може да пробваш със 3.9 серията.Преди това може ли да ми дадеш изхода от

fdisk -l
защото се съмнявам една работа

Сподели този отговор


Линк към този отговор
Сподели в други сайтове

Т.е да се съглася с ъпдейта?

Ето го и изхода:

root@ubuntu:~# fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3a973a96 Device Boot   Start End   Blocks Id  System /dev/sda1   63   41929649   20964793+ 7  HPFS/NTFS/exFAT /dev/sda2   41929711 194563214   76316752   f  W95 Ext'd (LBA) /dev/sda3 194563215 196523144   979965 82  Linux swap / Solaris /dev/sda4 196523145 234436544   18956700 83  Linux /dev/sda5   41929713 102398309   30234298+ b  W95 FAT32 /dev/sda6 * 102398373 157694039   27647833+  83  Linux /dev/sda7 157694103 194563214   18434556   b  W95 FAT32 root@ubuntu:~#  

Сподели този отговор


Линк към този отговор
Сподели в други сайтове

Сложи картата и дай пак изхода от командата

Сподели този отговор


Линк към този отговор
Сподели в други сайтове

root@ubuntu:~# fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3a973a96 Device Boot   Start End   Blocks Id  System /dev/sda1   63   41929649   20964793+ 7  HPFS/NTFS/exFAT /dev/sda2   41929711 194563214   76316752   f  W95 Ext'd (LBA) /dev/sda3 194563215 196523144   979965 82  Linux swap / Solaris /dev/sda4 196523145 234436544   18956700 83  Linux /dev/sda5   41929713 102398309   30234298+ b  W95 FAT32 /dev/sda6 * 102398373 157694039   27647833+  83  Linux /dev/sda7 157694103 194563214   18434556   b  W95 FAT32 root@ubuntu:~#  

Но сега я няма....

 

[ 23.875135] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.875797] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.841951] sky2 0000:07:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 26.841976] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1039.536256] usb 5-2: USB disconnect, device number 2 [ 4376.508078] usb 5-2: new low-speed USB device number 3 using uhci_hcd [ 4376.677261] usb 5-2: New USB device found, idVendor=13ba, idProduct=0017 [ 4376.677274] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4376.677282] usb 5-2: Product: Generic USB K/B [ 4376.696932] input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input11 [ 4376.697369] hid-generic 0003:13BA:0017.0003: input,hidraw0: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:1d.0-2/input0 [ 4376.717213] input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input12 [ 4376.717572] hid-generic 0003:13BA:0017.0004: input,hidraw1: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:1d.0-2/input1 [ 4428.952257] usb 5-2: USB disconnect, device number 3 [21858.964186] usb 5-2: new low-speed USB device number 4 using uhci_hcd [21859.134317] usb 5-2: New USB device found, idVendor=13ba, idProduct=0017 [21859.134329] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [21859.134337] usb 5-2: Product: Generic USB K/B [21859.153886] input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input13 [21859.154204] hid-generic 0003:13BA:0017.0005: input,hidraw0: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:1d.0-2/input0 [21859.173985] input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input14 [21859.174548] hid-generic 0003:13BA:0017.0006: input,hidraw1: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:1d.0-2/input1 [34059.682527] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34059.746670] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34059.817098] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34059.889402] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. root@ubuntu:~# root@ubuntu:~#  

 

След 6-7 вкарвания и изкарвания я засече.

Ето нов изход:

 

root@ubuntu:~# fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3a973a96 Device Boot   Start End   Blocks Id  System /dev/sda1   63   41929649   20964793+ 7  HPFS/NTFS/exFAT /dev/sda2   41929711 194563214   76316752   f  W95 Ext'd (LBA) /dev/sda3 194563215 196523144   979965 82  Linux swap / Solaris /dev/sda4 196523145 234436544   18956700 83  Linux /dev/sda5   41929713 102398309   30234298+ b  W95 FAT32 /dev/sda6 * 102398373 157694039   27647833+  83  Linux /dev/sda7 157694103 194563214   18434556   b  W95 FAT32 Disk /dev/mmcblk0: 1967 MB, 1967128576 bytes 57 heads, 56 sectors/track, 1203 cylinders, total 3842048 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000   Device Boot   Start End   Blocks Id  System /dev/mmcblk0p1 137 3842047 1920955+ 6  FAT16 root@ubuntu:~# root@ubuntu:~#  

[ 20.696235] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.696238] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.741376] psmouse serio4: synaptics: Touchpad model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0/0x0, board id: 3655, fw id: 32050 [ 20.781250] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10 [ 20.895826] ath: EEPROM regdomain: 0x10 [ 20.895832] ath: EEPROM indicates we should expect a direct regpair map [ 20.895836] ath: Country alpha2 being used: CO [ 20.895839] ath: Regpair used: 0x10 [ 20.899692] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 20.900408] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 20.901398] cfg80211: Calling CRDA for country: CO [ 20.919024] cfg80211: Regulatory domain changed to country: CO [ 20.919029] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.919032] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 20.919034] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 20.919037] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 20.919039] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 21.656055] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 22.081340] init: failsafe main process (815) killed by TERM signal [ 22.255011] Bluetooth: Core ver 2.16 [ 22.255040] NET: Registered protocol family 31 [ 22.255042] Bluetooth: HCI device and connection manager initialized [ 22.255576] Bluetooth: HCI socket layer initialized [ 22.255581] Bluetooth: L2CAP socket layer initialized [ 22.255590] Bluetooth: SCO socket layer initialized [ 22.264573] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.264577] Bluetooth: BNEP filters: protocol multicast [ 22.264588] Bluetooth: BNEP socket layer initialized [ 22.280716] Bluetooth: RFCOMM TTY layer initialized [ 22.280730] Bluetooth: RFCOMM socket layer initialized [ 22.280732] Bluetooth: RFCOMM ver 1.11 [ 22.315043] type=1400 audit(1373274752.063:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=924 comm="apparmor_parser" [ 22.318449] type=1400 audit(1373274752.067:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=923 comm="apparmor_parser" [ 22.318845] type=1400 audit(1373274752.067:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=923 comm="apparmor_parser" [ 22.324333] type=1400 audit(1373274752.075:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=924 comm="apparmor_parser" [ 22.324618] type=1400 audit(1373274752.075:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=924 comm="apparmor_parser" [ 22.332761] type=1400 audit(1373274752.083:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=926 comm="apparmor_parser" [ 22.339728] type=1400 audit(1373274752.087:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=927 comm="apparmor_parser" [ 22.793285] init: avahi-cups-reload main process (1000) terminated with status 1 [ 22.850087] ppdev: user-space parallel port driver [ 23.867814] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.868267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.874132] sky2 0000:07:00.0 eth0: enabling interface [ 23.875135] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.875797] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.841951] sky2 0000:07:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 26.841976] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1039.536256] usb 5-2: USB disconnect, device number 2 [ 4376.508078] usb 5-2: new low-speed USB device number 3 using uhci_hcd [ 4376.677261] usb 5-2: New USB device found, idVendor=13ba, idProduct=0017 [ 4376.677274] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4376.677282] usb 5-2: Product: Generic USB K/B [ 4376.696932] input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input11 [ 4376.697369] hid-generic 0003:13BA:0017.0003: input,hidraw0: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:1d.0-2/input0 [ 4376.717213] input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input12 [ 4376.717572] hid-generic 0003:13BA:0017.0004: input,hidraw1: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:1d.0-2/input1 [ 4428.952257] usb 5-2: USB disconnect, device number 3 [21858.964186] usb 5-2: new low-speed USB device number 4 using uhci_hcd [21859.134317] usb 5-2: New USB device found, idVendor=13ba, idProduct=0017 [21859.134329] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [21859.134337] usb 5-2: Product: Generic USB K/B [21859.153886] input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input13 [21859.154204] hid-generic 0003:13BA:0017.0005: input,hidraw0: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:1d.0-2/input0 [21859.173985] input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input14 [21859.174548] hid-generic 0003:13BA:0017.0006: input,hidraw1: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:1d.0-2/input1 [34059.682527] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34059.746670] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34059.817098] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34059.889402] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34168.442708] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34168.502742] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34168.562705] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34168.622770] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34170.246998] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34170.315176] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34170.389849] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34170.462582] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34174.166790] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34174.226766] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34174.287038] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34174.350150] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34177.110910] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34177.175081] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34177.251313] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34177.324830] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34183.138463] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34183.198609] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34183.258823] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34183.318767] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34185.963250] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34186.031264] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34186.105585] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34186.176616] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34190.346682] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34190.406712] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34190.467012] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34190.530771] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [34193.333048] mmc0: new SD card at address 1234 [34193.520627] mmcblk0: mmc0:1234 SA02G 1.83 GiB [34193.523630]  mmcblk0: p1 root@ubuntu:~# root@ubuntu:~#  

Сподели този отговор


Линк към този отговор
Сподели в други сайтове

-84, -123, -110 всякакви съм виждал с по-новите kernel-и. Има няколко бъга докладвани, има някакви решения и нито едно стабилно ... Някои хора казва, че ако сложат картата докато системата буутва им я рачита, други не.

 

Общо взето аз си реших проблема с външен четец. Ако картата ти е с преходник можеш да пробваш с друг преходник - при мен с един работеше с друг не. Най-голям проблем имах с Kingston карти и после 2 от 3 дадоха фира на други четци.

Сподели този отговор


Линк към този отговор
Сподели в други сайтове

Може да пробваш като форматираш наново паметта през Линукса.

mkdosfs -F32 /dev/mmcblk0
Редактирано от tux (преглед на промените)

Сподели този отговор


Линк към този отговор
Сподели в други сайтове

Регистрирайте се или влезете в профила си за да коментирате

Трябва да имате регистрация за да може да коментирате това

Регистрирайте се

Създайте нова регистрация в нашия форум. Лесно е!

Нова регистрация

Вход

Имате регистрация? Влезте от тук.

Вход

×

Информация

Поставихме бисквитки на устройството ви за най-добро потребителско изживяване. Можете да промените настройките си за бисквитки, или в противен случай приемаме, че сте съгласни с нашите условия за ползване.