Проблем с Windows 98 LmHosts

Здравейте , нуждая се от малко помощ отностно DNS хостовете на Windows 98.

Не знам дали съм го озаглавил правилно поста, но все пак това което искам да направя е следното:

Имам два компютъра в мрежа (1 и 2), като и двата са с реални ИП адреси .

На компютър 2 съм инсталирал апаче в което съм описал кой домейн в коя директория да сочи, съответно съм качил и индекс файл .

Идеята е от Компютър 1, да напиша в IE някакъв адрес примерно www.mydomain.bg (който предварително съм си избрал) и да ме хвърля примерно в компютър 2. Поразрових се тук там и мисля че се пипа някъде в C:\windows\hosts.sam и C:\windows\lmhosts.sam, обаче все пак да питам. Надявам са на малко по-подробни инструкции.

За Windows XP знам къде се пипа , но за 98 ми е проблем къде по точно в този файл се конфигурират хостовете към кой ИП адрес да сочат .

Ето кода на Lmhosts.sam в Windows 98

# Copyright (c) 1998 Microsoft Corp.

#

# This is a sample LMHOSTS file used by the Microsoft Wins Client (NetBios

# over TCP/IP) stack for Windows98

#

# This file contains the mappings of IP addresses to NT computernames

# (NetBIOS) names. Each entry should be kept on an individual line.

# The IP address should be placed in the first column followed by the

# corresponding computername. The address and the comptername

# should be separated by at least one space or tab. The "#" character

# is generally used to denote the start of a comment (see the exceptions

# below).

#

# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts

# files and offers the following extensions:

#

# #PRE

# #DOM:<domain>

# #INCLUDE <filename>

# #BEGIN_ALTERNATE

# #END_ALTERNATE

# xnn (non-printing character support)

#

# Following any entry in the file with the characters "#PRE" will cause

# the entry to be preloaded into the name cache. By default, entries are

# not preloaded, but are parsed only after dynamic name resolution fails.

#

# Following an entry with the "#DOM:<domain>" tag will associate the

# entry with the domain specified by <domain>. This affects how the

# browser and logon services behave in TCP/IP environments. To preload

# the host name associated with #DOM entry, it is necessary to also add a

# #PRE to the line. The <domain> is always preloaded although it will not

# be shown when the name cache is viewed.

#

# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)

# software to seek the specified <filename> and parse it as if it were

# local. <filename> is generally a UNC-based name, allowing a

# centralized lmhosts file to be maintained on a server.

# It is ALWAYS necessary to provide a mapping for the IP address of the

# server prior to the #INCLUDE. This mapping must use the #PRE directive.

# In addtion the share "public" in the example below must be in the

# LanManServer list of "NullSessionShares" in order for client machines to

# be able to read the lmhosts file successfully. This key is under

# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares

# in the registry. Simply add "public" to the list found there.

#

# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE

# statements to be grouped together. Any single successful include

# will cause the group to succeed.

#

# Finally, non-printing characters can be embedded in mappings by

# first surrounding the NetBIOS name in quotations, then using the

# xnn notation to specify a hex value for a non-printing character.

#

# The following example illustrates all of these extensions:

#

# 102.54.94.97 rhino #PRE #DOM:networking #net group's DC

# 102.54.94.102 "appname x14" #special app server

# 102.54.94.123 popular #PRE #source server

# 102.54.94.117 localsrv #PRE #needed for the include

#

# #BEGIN_ALTERNATE

# #INCLUDE \\localsrv\public\lmhosts

# #INCLUDE \\rhino\public\lmhosts

# #END_ALTERNATE

#

# In the above example, the "appname" server contains a special

# character in its name, the "popular" and "localsrv" server names are

# preloaded, and the "rhino" server name is specified so it can be used

# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"

# system is unavailable.

#

# Note that the whole file is parsed including comments on each lookup,

# so keeping the number of comments to a minimum will improve performance.

# Therefore it is not advisable to simply add lmhosts file entries onto the

# end of this file.

Просто доста отдавна не съм работил с 98 и идея си нямам къде да посоча хостовете.