Премини към съдържанието
Форумът в приложение

По-лесно сърфиране. Научи повече.

Kaldata.com - Форуми

Приложение на форума на цял екран с push известия, значки и други.

За да инсталирате това приложение на iOS и iPadOS
  1. Докоснете Иконата за споделяне в Safari
  2. Превъртете менюто и докоснете Добавяне към началния екран.
  3. Докоснете Добавяне в горния десен ъгъл.
За да инсталирате това приложение на Android
  1. Докоснете менюто с 3 точки (⋮) в горния десен ъгъл на браузъра.
  2. Докоснете Добавяне към началния екран или Инсталиране на приложение.
  3. Потвърдете, като докоснете Инсталиране.

Добре дошли!

Добре дошли в нашите форуми, пълни с полезна информация. Имате проблем с компютъра или телефона си? Публикувайте нова тема и ще намерите решение на всичките си проблеми. Общувайте свободно и открийте безброй нови приятели.

Моля, регистрирайте се за да публикувате тема и да получите пълен достъп до всички функции.

 

Windows 10 Впечатления и проблеми (2)

Featured Replies

преди 3 минути, DarkEdge написа:

Пробвал ли с с 10AppsManager да ремонтираш?

image.png.49bb7f973c8097c8d4da9e7c63a500d2.png

  • Отговори 14,2k
  • Прегледи 1,3m
  • Създадено
  • Последен отговор

Потребители с най-много отговори

Най-популярни публикации

  • Относно "модата" да се инсталира най-новата ОС, без да се осмисля необходимостта, е следствие от действията на самите създатели на ОС. Дълго време "господстваше" ХР и относително дълъг период Майкросо

  • Да ви разправя един майтап под Windows 10 днес. Трябваше ми да печатам, нооо...принтерът не го правеше. След 2 часа на диагностикка/ремонти/преинсталиране на драйвър,подмяна на win32spl.dll, минах под

  • Това ви е проблема - вярвате на някакъв, който бил видял "руски хакер" да разбива криптирането на телеметрията и в пакета имало снимка на екрана. Пълни глупости, целящи медийно внимание. Пакетите на т

Публикувани изображения

Стартира го с админски права, нали?
Изключи от компонентите в контролния панел указания в Details dotNet, рестарт и го включи.

Редактирано от DarkEdge (преглед на промените)

преди 13 минути, DarkEdge написа:

Стартира го с админски права, нали?
Изключи от компонентите в контролния панел указания в Details dotNet, рестарт и го включи.

Да, и изрично като администратор пробвах да го пусна, въпреки че щом си има иконката с онова жълто/синьо щитче, би трябвало да автоматично да си изиска такива права.

image.thumb.png.ab99136e929fa5c732f124b7990a0788.png

Рестарт и пак същото, само че този път пак ми се счупи Start менюто и довечера явно пак ще поправям.

Инструментът работи. Явно при теб има някакъв проблем. А какво пише в Details?
За Start  менюто - пробвай да рестартираш explorer и виж работи ли.

See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Management.Automation.CmdletInvocationException: Cannot find path 'C:\AppXManifest.xml' because it does not exist. ---> System.Management.Automation.ItemNotFoundException: Cannot find path 'C:\AppXManifest.xml' because it does not exist.
   at System.Management.Automation.LocationGlobber.ExpandMshGlobPath(String path, Boolean allowNonexistingPaths, PSDriveInfo drive, ContainerCmdletProvider provider, CmdletProviderContext context)
   at System.Management.Automation.LocationGlobber.ResolveDriveQualifiedPath(String path, CmdletProviderContext context, Boolean allowNonexistingPaths, CmdletProvider& providerInstance)
   at System.Management.Automation.LocationGlobber.GetGlobbedMonadPathsFromMonadPath(String path, Boolean allowNonexistingPaths, CmdletProviderContext context, CmdletProvider& providerInstance)
   at System.Management.Automation.LocationGlobber.GetGlobbedProviderPathsFromMonadPath(String path, Boolean allowNonexistingPaths, CmdletProviderContext context, ProviderInfo& provider, CmdletProvider& providerInstance)
   at System.Management.Automation.LocationGlobber.GetGlobbedProviderPathsFromMonadPath(String path, Boolean allowNonexistingPaths, ProviderInfo& provider, CmdletProvider& providerInstance)
   at System.Management.Automation.PSCmdlet.GetResolvedProviderPathFromPSPath(String path, ProviderInfo& provider)
   at Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand.ResolveArgumentPath(String path)
   at Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand.EvaluateParameters()
   at Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand.ProcessRecord()
   at System.Management.Automation.Cmdlet.DoProcessRecord()
   at System.Management.Automation.CommandProcessor.ProcessRecord()
   --- End of inner exception stack trace ---
   at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
   at System.Management.Automation.RunspaceInvoke.Invoke(String script, IEnumerable input)
   at _10AppsManager.Form1.Button1_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
10AppsManager
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.0.0
    CodeBase: file:///C:/Program%20Files/10AppsManager%20v2/10AppsManager.exe
----------------------------------------
Microsoft.VisualBasic
    Assembly Version: 10.0.0.0
    Win32 Version: 14.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Accessibility
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Runtime.Remoting
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Management.Automation
    Assembly Version: 3.0.0.0
    Win32 Version: 10.0.17133.1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Management.Automation/v4.0_3.0.0.0__31bf3856ad364e35/System.Management.Automation.dll
----------------------------------------
Microsoft.PowerShell.Commands.Diagnostics
    Assembly Version: 3.0.0.0
    Win32 Version: 10.0.17133.1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.PowerShell.Commands.Diagnostics/v4.0_3.0.0.0__31bf3856ad364e35/Microsoft.PowerShell.Commands.Diagnostics.dll
----------------------------------------
System.Configuration.Install
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration.Install/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.Install.dll
----------------------------------------
Microsoft.PowerShell.ConsoleHost
    Assembly Version: 3.0.0.0
    Win32 Version: 10.0.17133.1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.PowerShell.ConsoleHost/v4.0_3.0.0.0__31bf3856ad364e35/Microsoft.PowerShell.ConsoleHost.dll
----------------------------------------
Microsoft.PowerShell.Commands.Utility
    Assembly Version: 3.0.0.0
    Win32 Version: 10.0.17133.1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.PowerShell.Commands.Utility/v4.0_3.0.0.0__31bf3856ad364e35/Microsoft.PowerShell.Commands.Utility.dll
----------------------------------------
Microsoft.PowerShell.Commands.Management
    Assembly Version: 3.0.0.0
    Win32 Version: 10.0.17133.1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.PowerShell.Commands.Management/v4.0_3.0.0.0__31bf3856ad364e35/Microsoft.PowerShell.Commands.Management.dll
----------------------------------------
Microsoft.Management.Infrastructure
    Assembly Version: 1.0.0.0
    Win32 Version: 10.0.17133.1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.Management.Infrastructure/v4.0_1.0.0.0__31bf3856ad364e35/Microsoft.Management.Infrastructure.dll
----------------------------------------
System.ServiceProcess
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.ServiceProcess/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll
----------------------------------------
System.Management
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------
Microsoft.PowerShell.Security
    Assembly Version: 3.0.0.0
    Win32 Version: 10.0.17133.1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.PowerShell.Security/v4.0_3.0.0.0__31bf3856ad364e35/Microsoft.PowerShell.Security.dll
----------------------------------------
Microsoft.WSMan.Management
    Assembly Version: 3.0.0.0
    Win32 Version: 10.0.17133.1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.WSMan.Management/v4.0_3.0.0.0__31bf3856ad364e35/Microsoft.WSMan.Management.dll
----------------------------------------
Microsoft.WSMan.Runtime
    Assembly Version: 3.0.0.0
    Win32 Version: 10.0.17133.1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.WSMan.Runtime/v4.0_3.0.0.0__31bf3856ad364e35/Microsoft.WSMan.Runtime.dll
----------------------------------------
System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.DirectoryServices
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.DirectoryServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.DirectoryServices.dll
----------------------------------------
Anonymously Hosted DynamicMethods Assembly
    Assembly Version: 0.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/mscorlib/v4.0_4.0.0.0__b77a5c561934e089/mscorlib.dll
----------------------------------------
System.Numerics
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
----------------------------------------
System.Transactions
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
Microsoft.Windows.Appx.PackageManager.Commands
    Assembly Version: 10.0.0.0
    Win32 Version: 10.0.17133.1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.Windows.Appx.PackageManager.Commands/v4.0_10.0.0.0__31bf3856ad364e35/Microsoft.Windows.Appx.PackageManager.Commands.dll
----------------------------------------
Windows.Management
    Assembly Version: 255.255.255.255
    Win32 Version: 10.0.10011.16384
    CodeBase: file:///C:/WINDOWS/system32/WinMetadata/Windows.Management.winmd
----------------------------------------
Windows.Foundation
    Assembly Version: 255.255.255.255
    Win32 Version: 10.0.10011.16384
    CodeBase: file:///C:/WINDOWS/system32/WinMetadata/Windows.Foundation.winmd
----------------------------------------
System.Runtime
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Runtime.dll
----------------------------------------
Windows.ApplicationModel
    Assembly Version: 255.255.255.255
    Win32 Version: 10.0.10011.16384
    CodeBase: file:///C:/WINDOWS/system32/WinMetadata/Windows.ApplicationModel.winmd
----------------------------------------
Windows.System
    Assembly Version: 255.255.255.255
    Win32 Version: 10.0.10011.16384
    CodeBase: file:///C:/WINDOWS/system32/WinMetadata/Windows.System.winmd
----------------------------------------
Windows.Storage
    Assembly Version: 255.255.255.255
    Win32 Version: 10.0.10011.16384
    CodeBase: file:///C:/WINDOWS/system32/WinMetadata/Windows.Storage.winmd
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

 

Start менюто е общо взето счупено както ми се е чупило и преди - според ей този инструмент ShellExperienceHost и Cortana са счупени и не могат да се поправят; Start не се показва нито от клавиша на клавиатурата, нито от бутончето на taskbar-а; не работят контекстните менюта на програмите на taskbar-а (без значение дали са закачени или в момента работещи), не се показват календарът от часовника и action pane.

 

Впрочем доста ми е чудно какво толкова има интегрирано в календара, че някакъв нов feature в него да идва само в нов build на Windows, а не в самата програма. За Edge и Explorer иди дойди...

Редактирано от killchain (преглед на промените)

Разбрах какъв е проблемът с тулчето и с мгазина - липсват файлове. Виж тук

Здравейте как да направя така че да не ме пита всеки път при рестарт кои Windows да зареди,като аз имам само 1

може ли да постнеш една снимка след като стартираш msconfig 
снимката да е на секция boot
нямам идея, какво става и за това искам това

преди 8 минути, дръндю написа:

може ли да постнеш една снимка след като стартираш msconfig 
снимката да е на секция boot
нямам идея, какво става и за това искам това

оправих го,от тука прочетох:
https://www.tenforums.com/tutorials/22455-enable-disable-f8-advanced-boot-options-windows-10-a.html

В една мрежа частна са няколко компютъра, аз мога да достъпвам всички компютри, дори и да не ги виждам понякога мога да ги достъпвам с run а те мен не и не могат да ме достъпят виждат ме в мрежата, но не съм достъпен и не мога да разбера защо? Всички настройки са направини коректно, преди всичко си беше ок, може би след fall creators update  стана така, в опциите за споделяне всичко е включено, с изключение на "споделяне защитено с парола"  там е изключено. Аз не съм правил никакви промени, много често като се ъпдейтва ми нулира някои от настройките за споделяне, но като ги оправя си работи пак, но този път не става. Защитната стена не съм бутал да не би нещо от там да е?Тая 10-ка е нещо много скарана със споделянето и мрежите, голяма сигурност, голямо нещо...Не харесва старите Windows-и..С 8.1 си нямаше проблем сега  споделянето на принтери и папки куца, ако е към компютър, различен от  Windows 10.

Редактирано от gig93 (преглед на промените)

Забрани "Homegroup Listener" и "Homegroup Provider"
Пробва ли с Отстраняване на проблеми?

Редактирано от DarkEdge (преглед на промените)

Айде, инсайдъри! Ново издание - 17639.1000

 

Spoiler

What’s new in Build 17639

The next wave of Sets improvements is here

What belongs together stays together – we designed Sets to help you keep webpages, documents, files, and apps connected. We’ve been hard at work since our first wave of Sets improvements for RS5, and when you install today’s build you’ll find:

Drag and drop app tabs within and between Sets windows is now supported: It works just like it sounds! You can now drag an app tab around within the Set or combine tabbed app windows into Sets.

Note: If you open a Microsoft Edge tab outside of a Set, you can’t drag and drop it into a Sets window. Drag and drop for Microsoft Edge web tabs within Sets isn’t supported yet and you may experience a crash if this is attempted.

Tabs are now bubbled up in Alt + Tab: Have Photos, Microsoft Edge, and OneNote tabbed together? You can now use Alt + Tab to switch between them. Prefer to only show the primary window in Alt + Tab? There’s a new setting – more on that in just a moment…

Note: If you have multiple Microsoft Edge windows in a Set, only the one most recently accessed will be visible in Alt + Tab.

Improved Settings for Sets: We’ve updated the Settings for Sets via Settings > System > Multitasking. To start with, Sets now has its own section on this page, and is searchable (try typing “Sets” or “tabs” and it will appear in the dropdown). We’ve also added a setting to control the Alt + Tab behavior mentioned above.

New Sets section highlighted under Multitasking Settings.

File Explorer & Sets Improvements: We’ve heard your feedback – you’d like it to be easier to get two File Explorer windows grouped together, and we’re working on it. To start with, you no longer need to hold CTRL on the new tab page to launch a File Explorer window in a tab (this was a temporary necessity with the last wave). We’ve also added a new keyboard shortcut to open a new tab when a File Explorer window is in focus: Ctrl + T. Remember, you can use Ctrl + N to open a new window, and Ctrl + W to close the window/tab.

Finally, we’ve added some new UI for easily opening new tabs and windows in the File Menu.

Showing File Explorer’s File menu, with new Open new tab option.

And also, in the context menu when right-clicking on a folder.

Showing a folder’s context menu in File Explorer. Open in a new tab is highlighted.

New context menu options for tabs in Sets: If you right-click on a Sets tab, you’ll discover we’ve added several options for you to leverage, including “close other tabs”, “move to new window”, and “close tabs to the right”.

Showing context menu for a tab in Sets, has Close tab highlighted.

Improvements to Previous Tabs: We’ve done a few things to improve the experience in this space, including:

• You can now pick and choose which Previous Tabs you want to restore, instead of only being able to restore all tabs.

  • You can now pick and choose which Previous Tabs you want to restore, instead of only being able to restore all tabs. Note: if you use the Sets activity card in Timeline, it will automatically restore all tabs.
  • You can now restore Previous Tabs from any type of activity – whereas with the previous wave of features we only supported restoring tabs when the primary window was a document.
  • When you open a document that previously had tabs, a prompt will appear offering to restore those tabs, and the Previous Tabs button will be in the filled state. For things that aren’t documents, a prompt will not automatically appear, but you’ll know that there are tabs available to restore because the Previous Tabs button will be in the filled state.
  • We added an animation to the experience when there are no Previous Tabs available to be restored.

Other Sets improvements and fixes based on your feedback, including:

  • We fixed an issue where the active tab color wouldn’t be visible until you hovered over it.
  • We’ve been working on our polish, and you’ll notice that switching between open tabs is now a lot smoother.
  • We’ve improved the reliability when restoring tabs, fixing some issues where tabs didn’t restore as expected.
  • We fixed an issue where closing a tab in a Set then immediately opening a new tab might result in the window unexpectedly maximizing.

Here are a few things we’re still working on that aren’t quite finished / resolved yet:

  • File Explorer ribbon doesn’t stay pinned open across restart.It may take some time for the app exclude list in Sets settings to populate the first time it’s opened.
  • Sometimes it takes two tries to bring up an inactive tab from the taskbar.
  • There’s a chance that you may see an unexpected second row of tabs when you open the new tab page.
  • When you launch an app or website from the new tab page, there’s a chance focus will change to a different tab.
  • The “filled” state of the restore icon in Sets will remain filled even though you’ve restored all tabs.
  • We’re aware of an issue that causes Narrator to read extra text when invoking Alt + Tab, and we’re working on a fix.
  • The new tab may sometimes open blank. Closing the tab then opening it again should resolve this issue.

Coming soon: We’re planning to enable Sets for more Win32 (desktop) apps including Office! In order to try this new experience out with Office, you’ll need to be an Office Insider running the latest Office builds. Sign-up to be an Office Insider today if you aren’t already!

Bluetooth battery percentage in Settings

In Bluetooth & other devices Settings, you can now check the battery level of your Bluetooth devices. For Bluetooth devices that support this feature, the battery percentage will update whenever your PC and the device are connected.

Bluetooth page in Settings. Shows Surface Pen with 71% battery.

Windows Calculator Improvements

Windows Calculator has been updated (version 10.1803.711.0) to now correctly calculates square roots for perfect squares (integers that are squares of other integers). Because of the arbitrary precision arithmetic library used by the Calculator app, the square root calculation is an approximation calculated using the Exponential Identity function.

Previously, when you would calculate the square root of 4, the result would be 1.99999999999999999989317180305609 which would be rounded to 2 when displayed, because we calculated enough digits to do the rounding correctly. However, as soon as you subtract 2, you would see the remaining digits.

After this update, the square root calculation now recognizes perfect squares and correctly returns exactly 2 for the square root of 4.

General changes, improvements, and fixes for PC

  • We fixed an issue resulting in duplicate entries in Disk Management.
  • We fixed an issue that could result in certain UWP apps silently terminating when minimized.
  • We fixed an issue resulting in certain devices with BitLocker enabled unexpectedly booting into BitLocker recovery in recent flights.
  • We fixed a race condition that could result in the taskbar not autohiding after opening and closing the Start menu while a fullscreen window was visible.
  • We fixed an issue where typing in Start would switch to a blank Cortana screen if Start was open when the PC went to sleep.
  • We fixed an issue when using Arabic as your display language where after using the X to close the touch keyboard in a UWP app text field it might stop coming up automatically in that field.
  • Sometimes having too many choices can be confusing and less is more. That is why this new build has consolidated the places where users can adjust their display brightness by removing the display brightness slider in Control Panel Power Options and the “Display brightness” section under Power Options Advanced Settings. Don’t worry! You can still adjust your display brightness via Settings > System > Display settings, the Action Center, and via keyboard hot keys.

Known issues

  • If you open Settings and clicking on any links to the Microsoft Store or links in tips, Settings will crash. This includes the links to get themes and fonts from the Microsoft Store, as well as the link to Windows Defender.
  • On resuming from sleep, the desktop may be momentarily visible before the Lock screen displays as expected.
  • When Movies & TV user denies access to its videos library (through the “Let Movies & TV access your videos library?” popup window or through Windows privacy settings), Movies & TV crashes when the user navigates to the “Personal” tab.

Recommended Training for Windows Insiders

We’d like to take this opportunity to highlight some training courses that might interest some Windows Insiders from the Microsoft Professional Program:

Insider Story

 

Windows 10 е повече за телефони и таблети а не толкова за кмпютъри и лаптопи / пъпай със пръс другото не му мисли / 

Чудяса къкв ли ще е WIndows 11 или там 12 не се знае коя версия но се надявам да има понови неща примерно да си говоря със него но български като SIRI във IPHONE.

Ако е това WInodws 11 ще си го купя още като излезе във българия поне се надявам да има български език че като гедам започнаха много програми да махат българския език и това не е добре.

 

Преди малко компилирано
17639.1000.180330-1630.RS_PRERELEASE_CLIENTPRON_OEMRET_X64FRE_EN-US.ISO

Редактирано от DarkEdge (преглед на промените)

на 4/13/2018 в 12:29, DarkEdge написа:

Ново инсайдърско издание 17643.1000.180405-1509.RS_PRERELEASE

Т.е. скоро да очакваме ли официално ново издание? :)

преди 13 минути, П.Петров написа:

Т.е. скоро да очакваме ли официално ново издание? :)

Всяко издание според графика му. Инсайдърските на около 2 седмици.

Още малко за Windows Updates, Microsoft Updates и Microsoft Storе:
https://blogs.technet.microsoft.com/swisspfe/2018/04/13/win10-updates-store-gpos-dualscandisabled-sup-wsus/

Редактирано от DarkEdge (преглед на промените)

преди 22 часа, DarkEdge написа:

Всяко издание според графика му. Инсайдърските на около 2 седмици.

Аз имам предвид издание като 1709 :)

Добавете отговор

Можете да публикувате отговор сега и да се регистрирате по-късно. Ако имате регистрация, влезте в профила си за да публикувате от него.

Гост
Публикацията ви съдържа термини, които не допускаме! Моля, редактирайте съдържанието си и премахнете подчертаните думи по-долу. Ако замените букви от думата със звездички или друго, за да заобиколите това предупреждение, профилът ви ще бъде блокиран и наказан!
Напишете отговор в тази тема...

Разглеждащи това в момента 0

  • Няма регистрирани потребители разглеждащи тази страница.

Дарение

  • Подкрепи съществуването на форума - направи дарение
    25%
    Дарени 252.69 EUR от нужните 1,000.00 EUR

Бюлетин

Получавайте известие, когато има важна промяна или новина свързана с форума.

Профил

Навигация

Търсене

Търсене

Конфигуриране на push известия в браузъра

Chrome (Android)
  1. Докоснете иконата на катинар до адресната лента.
  2. Докоснете Разрешения → Известия.
  3. Променете предпочитанията си.
Chrome (Desktop)
  1. Кликнете върху иконата на катинар в адресната лента.
  2. Изберете Настройки на сайта.
  3. Намерете Известия и коригирайте предпочитанията си.