Някой има ли проблеми с последната бета на Технолоджи Превю? След ъпдейта Екшън центъра на Уина изрева, че нямам пуснат антивир и антиспай. Кога гледам в статус ги дава пуснати, а в настройки са спрени и същевременно при десен клик в експлорера да сканира папка програмата не прави нищо! Опитах се да го репортна, но ми дава грешка при изпращането на репорта!

Изпратиха ми имейл още вчера по обяд:

Hello,

We are releasing today an important hotfix to all the F-Secure Internet Security 2012 Beta installations.

The hotfix fixes two problems which are linked together:

- Windows Action Center reports that Computer Security is turned off

- Manual scanning cannot be started

The hotfix will be downloaded and installed automatically. After it has been installed, it will prompt for a reboot. The reboot is mandatory, otherwise the fix is not taken into use.

Yours,

F-Secure Beta Piloting Team

1. Браво, тъкмо се разтърсих за някоя примоция за 6-12 месеца. Ама що нямам мейл и аз? Нищо, чакам да се ъпдейтне. 2, И тая тема не ми праща мейл, че има отговор. Нещо странно става :-D

Аз все още нямам hotfix

Не бързай. Аз като бях с F-Secure Beta, и ми изпратят писмо с информация за нов релийз , обикновено минаваха ден-два докато дойде при мен. Този път може да им трябва повече време да го разпространят навсякъде, а България ме съмнява да им е приоритет (въобще ако зависи от това де)...Тя програмата работи и си пази, предполагам, бъди търпелив и всичко ще се оправи. П.П. Все пак е Бета, и за без пари поне една издънка не може да няма...

Hello,

This message is sent to everyone who has subscribed to F-Secure Internet Security 2012 Beta project, earlier known as F-Secure Technology Preview.

We'd like you to answer a short survey about our product. Answering will take just a few minutes. Everyone who answers and leaves their e-mail address will participate a draw of a Microsoft Xbox 360 Kinetic Special Edition gaming device.

The survey closes on September 21st, 2011. Link to it can be found at the bottom of this e-mail.

Yours,

F-Secure Beta Piloting Team

https://www.webropol.com/p.aspx?t=1&l=571512_f86f8176013a4652

Hello,

We will release a new beta version (R43) to all the F-Secure Internet Security 2012 Beta users today, September 20th.

As usual, all the existing installations will receive this F-Secure Internet Security 2012 Beta R43 release as an automatic upgrade.

---------------------------------------------

Release notes:

http://download.f-secure.com/beta/fstp/tpreleasenotes.rtf

---------------------------------------------

Features introduced in F-Secure Internet Security 2012 Beta R43:

* Improved DeepGuard 4 logic, that should result in lot less false positives.

* Improved Application Control with more user friendly settings and DeepGuard 4 integration for server (inbound) applications

* Online Safety main GUI is finalized for IS2012

* Unrated content category is enabled

* The Support Tool now creates its output file to the shared desktop.

* The product checks now for system requirements (Operating System, memory and disk space) before installation and upgrades.

* Bug fixes

Бързат, бързат вече....

Hello,

We will release the Release Candidate version (R44) of our Internet Security 2012 product today, September 29th.

We need feedback from you quickly about this version: If you encounter any bugs with this version, please report them to us right away...

The deadline for bug reports is Sunday October 2nd.

Release notes:

http://download.f-secure.com/beta/fstp/tpreleasenotes.rtf

---------------------------------------------

Features introduced in F-Secure Internet Security 2012 Release Candidate R44:

* Firewall default profile was changed from "Office" mode to "Normal". This new mode is more relaxed for "Home" usage. There should be less problems with games.

* Online Safety for Windows Vista and 7 is shipped with improved Windows Filtering Platform (WFP) functionality. The driver is loaded only if "Web page filter" is turned on.

* Hosts file infections are removed before installation start.

* Bug fixes

You can find the Release Notes and product installer (needed only for new installations) in the Resources section at https://beta.f-secure.com/ .

Отчайващо зле се представи антивирусният енжин при сканиране на зарази от преди месец

Deep Guard-а при стартиране блокира повечето файлове но все пак общият резултат след сканиране с Hitman Pro изобщо не ме радва.

Отделно при почистването на един файл зацикли на около 80% и два три пъти после при сканиране не дава опция да го изтрия,а пише че сам да го премахна от директорията му. При автоматичен режим пише,че го трие и той пак си вътре.

пп. редакцията - добавен скрийн

Редактирано 30 септември 201114 г. от nikssi (преглед на промените)

Hello,

We will release the Release Candidate 2 version (R44.5) of our Internet Security 2012 product today, October 6th!

If you encounter any bugs with this version, please report them to us right away.

Important note: To speed up processing of the bugs, please *always* include F-Secure Support Tool report (FSDIAG.TAR.GZ) with the bug report. If your report is about user interface or localization related issue, please include also a screenshot of our user interface where the problem is visible.

This version will again come as an automatic upgrade to all the F-Secure Internet Security 2012 Beta/Release Candidate users.

---------------------------------------------

Release notes:

http://download.f-secure.com/beta/fstp/tpreleasenotes.rtf

---------------------------------------------

Features introduced in F-Secure Internet Security 2012 Release Candidate 2 (R44.5):

* No new features, but some important bug fixes especially in the installation and upgrade routines

Тия дали пуснаха официална версия, че нещо бетата ми се прецака. На Lounch pada стои цял ден Upgrading, а на Subscription пише до Март 2012, но над датата пише 1/2 subscription in use!!! Кво значи това?

F-Secure Internet Security 2012 -излязла е, ползвай промото за 2011 от CHIP... трябва 2011 да се ъпгрейдне автоматично до 2012, поне така писаха...

Редактирано 30 октомври 201114 г. от viperdick (преглед на промените)

Същия кондом е като 2011-та:

http://youtu.be/bQTOr4sQjjs

Редактирано 31 октомври 201114 г. от Sandbox (преглед на промените)

Сега ще сложа 11 пък да видиме дали ще се ъпдейтне до 12

Промоцията не става!!! Кода е 1 - UQ6B-B2CP-3M66-X8CH-XC70 и е до 15,12,2011 и на всичкото отгоре не се ъпдейтна до 2012 версия!

дават на всеки 3 месеца един и същи код на всеки - така беше и досега Пробвай да сложиш триала на 2012 и после да активираш с промо кода за 2011

Нещо я омазах работата Сложих примоцията на Авира временно.

Опитах директно с промо кода на версия 2012 и не стана. Свалих от бета акаунта си инсталатора,инсталирах обнових и съм ток и жица.

Същият промо код на F-Secure Internet Security 2012 не тръгва.

Здравейте Интересува ме има ли 64 битова версия на F-Secure Anti-Virus Client Security.Търсих из нета,но нищо не намирам,или може би грешно търся.

Здравейте

Интересува ме има ли 64 битова версия на F-Secure Anti-Virus Client Security.Търсих из нета,но нищо не намирам,или може би грешно търся.

За XP има само 32 битова,за другите оси си има 64. Странно наистина!

Поне така пише тук

Operating systems

- Microsoft Windows XP with SP3 (32-bit editions only)

- Microsoft Windows Vista (all 32-bit and 64-bit editions)

- Microsoft Windows Vista with SP1 or newer (all 32-bit and 64-bit editions)

- Microsoft Windows 7 (all 32-bit and 64-bit editions)

- Microsoft Windows 7 with SP1 or newer (all 32-bit and 64-bit editions)

Едит; Internet Security 2012 ги поддържа всичките!

Редактирано 28 ноември 201114 г. от lost in (преглед на промените)

F-Secure Internet Security Technology Preview - new version (TP48) released!

Hi,

After a few weeks' break to our normal release cycle, we will release a new Internet Security Technology Preview version to all our users today.

In this TP48 release we have fixes to several issues reported by our beta testers. For instance Opera browser users suffered from broken page layouts - this has now been fixed. We also found an issue which many Windows XP users reported: F-Secure Hoster DLL should not hang any more during the shutdown. List of these fixes can be found in the product release notes.

We have also new functionality in this version:

* Online Safety on Windows XP has new LSPv2, which improves stability and browsing experience for all XP users.

* Firefox 8 and Firefox 9 beta support for Online Safety

* New plugin handling for Firefox that improves the stability and browsing experience for all Firefox users.

* When upgrading from PSC9/IS2011 all Computer Security settings are now kept or migrated to suitable ones.

* One process removed (fsgk32st.exe, "F-Secure Gatekeeper Handler Starter") to improve the memory footprint.

* New F-Secure Support Tool that creates normal ZIPs and uses less CPU.

We would be very eager to hear your feedback about this version. Should you encounter any bugs, please create a bug report to us at https://beta.f-secure.com/ and remember to always include the F-Secure Support tool report with it.

This version will again come as an automatic upgrade to all the F-Secure Internet Security Technology Preview users.

You can find the Release Notes and product installer (needed only for new installations) in the Resources section at https://beta.f-secure.com/.

Kind regards,

F-Secure Beta Piloting Team

Регистрираните могат да се запишат за тестването на F-Secure Client Security 9.30 Beta

пп. Интересното е,че регистрацията ми е удължена до 01.12.2012 год.

Редактирано 30 ноември 201114 г. от nikssi (преглед на промените)

F-Secure® Client Security 9.30 build 375 (Release Candidate)

The old member of F-Secure Corporate products, Client Security has again reached a new version, 9.30. This version brings you a new feature called Device Control which allows you to enable or disable hardware devices on the client computer from your Policy Manager Console along with few bug fixes.

RELEASE NOTES

F-Secure® Client Security 9.30 build 375 (Release Candidate)

Copyright © 1993-2011 F-Secure Corporation. All Rights Reserved.

Portions Copyright © 2004 BackWeb Technologies Inc.

This product may be covered by one or more F-Secure patents, including the following: GB2353372, GB2366691, GB2366692, GB2366693, GB2367933, GB2368233, GB2374260

1. General

This document contains information about F-Secure Client Security 9.30 Release Candidate. We strongly recommend that you read the entire document. Please refer to the online help for more information.

2. Product contents

This product enables you to install the following features:

· Virus & Spyware Protection – protects your computer against viruses, trojans, spyware, rootkits and other malware

· Internet Shield – consists of Firewall, Application Control, Intrusion Prevention (IPS) and Dial-up Control

· E-Mail Scanning – protects you against malware spread via e-mail by detecting malicious content in e-mail traffic (IMAP4, POP3 and SMTP protocols)

· Web Traffic Scanning – additional protection against malware by detecting and blocking malicious content in web traffic (HTTP protocol)

· DeepGuard™ – proactive 0-hour protection technology that detects unknown threats by monitoring program behavior in real-time and stopping dangerous activities.

· Browsing Protection – additional protection against web browser exploits and rogue sites

· Device Control – provides the ability to control and disable hardware devices

· Microsoft NAP Plug-in – enables integration with Microsoft Network Access Protection (NAP)

· Cisco NAC Plug-in – enables integration with Cisco Network Admission Control.

The supported languages are: English, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Norwegian, Polish, Portuguese, Brazilian Portuguese, Slovenian, Spanish, Swedish and Turkish, Chinese (P.R.C, Taiwan, Hong Kong), Estonian, Canadian French, Latin American Spanish, Romanian, Russian.

3. Installation and system requirements

Before you install the product, we recommend that you review the sections in this topic to ensure that your network, hardware, software, and other system components meet the requirements for F-Secure Client Security 9.30 Release Candidate.

3.1 Installation keycode

This Release Candidate build comes with the evaluation key that allows you to install and use all features of the product for 180 days. If you have a valid F-Secure license certificate and installation keycode for the previous version of F-Secure Client Security, you can enter it during local or remote installation.

Note: If you install the product with the evaluation key on top of a previous version that was installed with the full license key, the installation will fail.

3.2 Stand-alone or centrally managed installations

If you plan to install the product as a standalone installation, then you should run the setup program (fscs930-375-rc.exe) on your computers locally. Note that installation requires that you have local administrator rights.

Note: In this Release Candidate, the new Device Control feature can be managed only from Policy Manager Console.

For centrally managed installations, you should import the installation JAR package (fscs930-375-rc.jar) to Policy Manager Console and deploy the product remotely to selected hosts. With Policy Manager Console you can also export an MSI package that you can deploy via other central management systems.

3.3 Supported platforms

This release can be installed and used on the following platforms:

· Microsoft Windows XP with SP3 (32-bit editions only)

· Microsoft Windows Vista (all 32-bit and 64-bit editions)

· Microsoft Windows Vista with SP1 or newer (all 32-bit and 64-bit editions)

· Microsoft Windows 7 (all 32-bit and 64-bit editions)

· Microsoft Windows 7 with SP1 or newer (all 32-bit and 64-bit editions)

3.4 Recommended hardware requirements

Microsoft Windows 7 and Vista

· Processor: Intel Pentium 4 2GHz or higher

· Memory: 1GB or more

· Disk space: at least 1 GB

· Internet connection: an Internet connection is required in order to receive updates

Microsoft Windows XP SP3

· Processor: Intel Pentium III 1Gz or higher

· Memory: 512 MB or more

· Disk space: at least 1 GB

· Internet connection: an Internet connection is required in order to receive updates

3.5 Centralized management requirements

The product can be deployed and managed with F-Secure Policy Manager 9.00 or newer. F-Secure Policy Manager 10.00 is recommended.

3.6 Upgrading from previous versions

This Release Candidate build supports upgrading from all previous Client Security 9.x versions.

4. What’s new

This section describes the new features, enhancements, and most important problems fixed in F-Secure Client Security 9.30 Release Candidate.

4.1 New features and enhancements

· Device Control – this feature provides the ability to disable and enable hardware devices on client computers (a single device or a class/subclass of devices) from Policy Manager Console.

4.2 Fixed issues

The following issues have been fixed in this Release Candidate build since the previous (9.20) release:

· The “Configure communication with Policy Manager Server” page in Policy Manager Console installation wizard is not localized.

· Copyright year in Manual Scan reports is not actual.

· F-Secure Client Security Microsoft NAP plug-in remains on the client host after uninstalling Client Security through Policy Manager Console.

· Mistakes in Japanese localization (CTS-82850).

· The Microsoft NAP plug-in requirement “Maximum number of days since the last connection to Policy Manager Server” is not working in F-Secure Client Security (CTS-82866).

· "AusweisApp" (a tool for online identification of German passports) is blocked when an F-Secure product is installed (CTS-81395).

· Size of the FSMA working set increases constantly (CTS-78978).

· Firewall Daemon Shutdown issue (CTS-83258).

· “Unload and continue with current firewall profile” option in F-Icon menu turns F-Secure firewall off (CTS-83308).

· “Force restart without asking the user to save open documents” checkbox in “Select restart options” window of Installation Wizard in Policy Manager Consol doesn’t work as expected on Vista and Windows 7 (CTS-81750)

5. Known issues

5.1 Installation, upgrade and uninstallation

Policies are not received immediately after reboot

In some cases, the installed client may not receive policies immediately after the reboot. The client will usually recover automatically after some time, and receive the new policy. If not, a reboot should help.

Unused databases are still visible after upgrade

When upgrading, some databases and engines used by the previous version might not be needed anymore. These are still visible in “Settings – Other settings – Downloads”, marked as “Not Installed”. This is normal, and after 7 days they will be automatically removed.

System might be slow for several minutes after the first reboot while the installation finishes

The system may start up slowly following the initial reboot after installation. This is because the installation is being finalized in the background by downloading and installing various updates, etc.

The effect is more visible after a fresh installation, where more updates need to be downloaded. If opened, the local UI will notify you of this with a blue status indicator and a “Completing Installation” status text.

Subsequent reboots are not affected.

NAP Health Validator is not removed from configured health policies during uninstallation

During uninstallation, references to F-Secure System Health Validator (SHV) are not automatically removed from health policies. Computers that have those policies in use are considered non-compliant with health policies and are quarantined. To correct broken references to F-Secure SHV, open the health policies properties from Network Policy Server console (nps.msc) and confirm the automatic update.

5.2 DeepGuard

DeepGuard does not protect services in Windows 7 (CTS-65247)

When stopping a protected service from the command line or from the Services applet, DeepGuard fails to prompt about it. However, it still protects services from most malicious stop attempts. This problem only exists in the 32-bit version of Windows 7.

5.3 Browsing Protection

Disabling Browser Protection requires closing open browsers to take effect

If there are open browsers and the Browsing Protection feature is disabled, the change will only affect the open browser once it has been closed and restarted.

Browsing Protection toolbar may be not be visible in Internet Explorer 7

When launching Internet Explorer 7 after a fresh installation, the Browsing Protection toolbar may not be visible on some computers. Even without the toolbar, Browsing Protection is still working. Closing and restarting Internet Explorer 7 will resolve this issue.

5.4 Anti-Virus

Incorrect engine versions are shown in policy statistics

Incorrect engine versions are shown in the Status tab of Policy Manager Console (F-Secure Anti-Virus > Plug-ins table) after a clean installation. This affects scanning reports. The problem can be fixed by restarting the FSGKHS service.

5.5 Dial-up control

“Disallow user changes” doesn’t work for the dial-up control table

It’s possible to modify the dial-up control table from Client Security’s local GUI even when it has the “disallow user changes” restriction set from Policy Manager.

6. Contact information and feedback

We are looking forward to hearing your comments and feedback on the product functionality, usability and performance.

For this RC release, please report any technical issues:

· By e-mail to: [email protected]

· Through F-Secure Beta Program Feedback Form at: http://www.f-secure....s/feedback.html

· Via F-Secure Community: http://community.f-s...n_Beta_Programs

When reporting a technical problem, please attach the F-Secure system summary report to the feedback. To collect the system summary report, you need to have administrator rights. In Windows XP, select Start | All Programs | F-Secure Client Security 9.30, right-click on ”Support Tool”, select Run as and finally select to run the program as administrator. In Windows Vista and Windows 7, select Start | All Programs | F-Secure Client Security 9.30, right-click on “Support Tool” and select Run as administrator.

7. F-Secure license terms

F-Secure license terms are included in the software. You must read and accept them before you can install and use the software.

Hello,

We will release today, Wednesday the 21st of December, a new R49.5 version of F-Secure Internet Security Technology Preview.

This upgrade has only a couple of important bug fixes as well as the support for Bulgarian language.

Several of you have reported about F-Secure DLL Hoster crashes. Those crashes have caused some slowness issues as well as some other side effects. This is now fixed in the ISTP 49.5 release.

If you encounter any problems with this release, please report them through https://beta.f-secure.com/ as soon as possible.

We also would like to send our Christmas greetings all our users out there around the world - Merry Christmas and happy new year 2012!

Yours,

F-Secure Beta Piloting Team

Не може да бъде - F-Secure на български, и да видя няма да повярвам.... Е що пък, отдавна сме в Европа...

Не може да бъде - F-Secure на български, и да видя няма да повярвам....

Е що пък, отдавна сме в Европа...

Аз обнових версията но българският не ми е достъпен. Само английски и руски. Може би не са обновили още онлайн инсталатора. Много бих се радвал ако има и български.