Премини към съдържанието
Форумът в приложение

По-лесно сърфиране. Научи повече.

Kaldata.com - Форуми

Приложение на форума на цял екран с push известия, значки и други.

За да инсталирате това приложение на iOS и iPadOS
  1. Докоснете Иконата за споделяне в Safari
  2. Превъртете менюто и докоснете Добавяне към началния екран.
  3. Докоснете Добавяне в горния десен ъгъл.
За да инсталирате това приложение на Android
  1. Докоснете менюто с 3 точки (⋮) в горния десен ъгъл на браузъра.
  2. Докоснете Добавяне към началния екран или Инсталиране на приложение.
  3. Потвърдете, като докоснете Инсталиране.

Добре дошли!

Добре дошли в нашите форуми, пълни с полезна информация. Имате проблем с компютъра или телефона си? Публикувайте нова тема и ще намерите решение на всичките си проблеми. Общувайте свободно и открийте безброй нови приятели.

Моля, регистрирайте се за да публикувате тема и да получите пълен достъп до всички функции.

 

MalwareBytes' Anti-Malware - проблеми, дискусии, мнения

Featured Replies

Няма проблеми, че е нелегален Win-a. Не би трябвало тези ъпдейти да изискват genuine, както при някои други. Публикувано изображение

 

 

добре, да не се плаша

изтеглих ги инсталирах ги

Публикувано изображение

  • Отговори 1,2k
  • Прегледи 182k
  • Създадено
  • Последен отговор

Потребители с най-много отговори

Най-популярни публикации

  • Тези, които видят такова число за базата данни на MBAM: 911122006 (това е само пример), да не се притесняват. От днес има нов вариант за номериране на базата данни за MBAM, справка: Malwarebytes New

  • Тази новина много ме зарадва! Ха, дано MBAM да ги мачка всичките Туулбари и нежелани приложения, че така съм им набрал покрай близки и приятели.

  • B-boy/StyLe/
    B-boy/StyLe/

    Има нова версия на почистващия инструмент поддържащ вече и версия 3. За тези, които имат проблеми с нея може да почистят с него и да я инсталират наново. https://forums.malwarebytes.com/topic/196

Публикувани изображения

  • 2 месеца по-късно...
  • 2 седмици по-късно...

Вчера се обнови при мен, но не иска да включи Защитата от злонамерени страници.

Моля помагайте

:(

Тука има инструкции.Много хора се оплакват от същия проблем.

https://forums.malwarebytes.org/index.php?/topic/158722-malicious-website-protection-disabled/

Благодаря ти много.

Оправи си се от само себе си, на иконката долу при поредния ми опит да сложа човка и зацепи.

 

Но ще го имам предвид това, явно имат бъгове по новите версии.

  • 1 месец по-късно...
  • 3 седмици по-късно...
  • 2 месеца по-късно...

Една добра новина за ползващите версия 1.75!Първоначално беше съобщено, че в края на месец март се спира подръжката на версията,включително обновяванията със сигнатури.

 

Official statement of support for 1.75

We will continue to support version 1.75 for another year. There is no specified cutoff date at this time.
 
This means:

  • We will continue to support the product as normal and help individual users with issues.
  • Version 1.75 Business will continue to be available/sold on our site, but the 1.75 Consumer version will not as this has been replaced by 2.0
  • We continue to encourage consumer users to upgrade from 1.75 to 2.0

https://forums.malwarebytes.org/index.php?/topic/144799-introducing-malwarebytes-anti-malware-20/?p=938973

  • 3 седмици по-късно...

Като допълнение към поста на URIEL:

Най-после "нормален" фейс на програмата,като изключим "smiley face" ,което сякаш малко не е на място:

7958698z.png

 

7958651G.png

 

7958657d.png

 

 

Ето поробности:

 

What’s new:

  • Brand new UI design!  Much cleaner look with a toned-down color scheme.
  • Improved scan flow – all scans now automatically check for and apply the latest database updates so you're always scanning with the latest protection. (Exception:  this will not occur if you have the option to “check for updates before scanning” disabled.)
  • You’ll automatically be prompted to download new program updates for the beta whenever they’re available.  You can check back to this thread for details on the latest changes included in the new versions.
  • Simplified Quarantine flow – threats detected are pre-selected for removal and users are presented with a single “Remove Selected” button.  Clicking “Remove Selected” quarantines all checked items.  If you uncheck any threats you will see a new dialog asking what action should be taken on the unselected items:  Ignore Once, Ignore Always, Cancel. 
  • Improved malware protection capabilities, including enhanced rootkit detection and removal.
  • The Minimize button now minimizes the main program window to the taskbar instead of the tray.
  • Addressed numerous issues with Scheduled Scans, including showing the correct date for “Next schedule scan” on the dashboard.

Known issues:

  • The What’s New / Release Notes included in the installer have not yet been updated and are showing old items from the 2.0.3 release. 
  • Text strings new to 2.1 have not yet been translated.  (This will be happening over the next several weeks.)
  • The tables throughout the UI will be updated for consistency and improved behavior prior to release.
  • The informational module shown during scan (and on Scan Results page for Free and Trial) includes several links that are not yet active.

Heuristic анализа е малко по-бавен от обичайното,но това е все пак бета.....

Редактирано от NIKISHARK (преглед на промените)

Чудесно малко промяна.

Тази сутрин тръгнах да слагам бетата,покана за рестарт и после ...нова покана!Вече съм с 2.1.1.1010 !Фейса е променен,като функции за сега не откривам нищо ново... :)

Редактирано от Iliyan Nikolov (преглед на промените)

Нова бета:

Malwarebytes Anti-Malware 2.1.3.1017 Release Candidate 2

7979529s.png

 

Част от промените и корекциите:

Improvements:
• Brand new UI design! Much cleaner look with a toned-down color scheme.
• Improved scan flow – all scans now automatically check for and apply the latest database updates so you're always scanning with the latest protection. (Exception: this will not occur with Scheduled Scans if you have the option to “check for updates before scanning” disabled.)
• Simplified Quarantine flow – threats detected are pre-selected for removal and users are presented with a single “Remove Selected” button. Clicking “Remove Selected” quarantines all checked items. If you uncheck any threats you will see a new dialog asking what action should be taken on the unselected items: Ignore Once, Ignore Always, Cancel.
• Improved malware protection capabilities, including enhanced rootkit detection and removal.
• The Minimize button now minimizes the main program window to the taskbar instead of the tray.
• The default display timeout for notifications was changed to 3 seconds instead of 7 seconds
• The default value for "Show notification after successful update" is now set to "Off" for all scheduled updates
• Removed the informational message from the main dashboard view
• Remove support for Thai language due to quality issues with the translation
• Installation of a Consumer/Home version of Malwarebytes Anti-Malware over a Business version is now blocked

Issues Fixed:
• Admin users should no longer see a prompt to login as admin to perform a program upgrade
• Fixed issue where the web protection service (MWAC) was not restarting properly
• Fixed numerous issues with scheduled scans, including showing the correct date for “Next scheduled scan” on the dashboard
• Fixed issue where mbamscheduler was starting on boot when Malwarebytes Anti-Malware was set not to start with Windows
• Fixed issue where any non-English language selected during installation would not be applied after installation
• Fixed issue where Malwarebytes Anti-Malware did not always automatically update the database on installation
• Fixed an issue where the “Delay Protection at startup for 15 seconds” setting showed as enabled, but was actually disabled. (We recommend reviewing this option to ensure it is configured as you intended.)
• Fixed issue where "Error Code 6" displayed at the end of scans
• Fixed issue on Windows XP where scheduled scans on reboot would not start if the "Enable self-protection module" was checked
• Malwarebytes Anti-Malware now honors self-protection settings detected from a previous installation
• Fixed issue where context menu scan was not honoring user selection under detection and protection setting
• Several issues with notifications were fixed
• Several enhancements were made to the user interface to address accessibility issues
• Several UI and user experience enhancements implemented

 

Повече подробности:https://forums.malwarebytes.org/index.php?/topic/166008-malwarebytes-anti-malware-2131017-beta/

Нова бета:

Malwarebytes Anti-Malware 2.1.3.1017 Release Candidate 2

 

Част от промените и корекциите:

 

Тук е България и се говори и пише на български!

Ключетата от некъде си стават и за тази версия.Чудесно.И за МБАЕ си намерих.

Редактирано от B-boy[StyLe] (преглед на промените)

Horhe,

 

1. Това са промените и никой не е длъжен да ги превежда, а и самата програма така или иначе е преведена от нашия сънародник Night_Raven.

2. Изобщо използването на пиратски версии не допринася за развитието на програмата. Ако ви харесва и имате възможност, по-добре си я купете тогава. Иначе и безплатните версии се справят повече от прилично.

3. Моля занапред не цитирайте толкова дълги постове.

 

Благодаря за разбирането! Поздрави!

Финална версия на Malwarebytes Anti-Malware 2.1.4.1018

Hello everyone--

 

We’re very excited to announce that Malwarebytes Anti-Malware 2.1.4 officially launched today! 

 

This release consists a number of user interface enhancements, most notably a completely updated design.

 

You may download Malwarebytes Anti-Malware 2.1.4 by clicking here.  

 

The new version is available for new downloads only at this time.  We won’t be enabling updates for current customers until early next week (just in an effort to stagger the release).  If you’re a current user and you want the update early, you’re always welcome to download and install the new version over any older version you’re running now.

 

We hope you find the new design intuitive and problem-free, but if you have any issues please let us know.  You can always report problems in our Help forum or you can visit our Support portal where you’ll find our Knowledge Base and user guides, and where you can contact our Support team directly.

 

Here's the full list of changes in this release:

 

Improvements:

  • Brand new UI design!  Much cleaner look with a toned-down color scheme.
  • Improved scan flow – all scans now automatically check for and apply the latest database updates so you're always scanning with the latest protection. (Exception:  this will not occur with Scheduled Scans if you have the option to “check for updates before scanning” disabled.)
  • Simplified Quarantine flow – threats detected are pre-selected for removal and users are presented with a single “Remove Selected” button.  Clicking “Remove Selected” quarantines all checked items.  If you uncheck any threats you will see a new dialog asking what action should be taken on the unselected items:  Ignore Once, Ignore Always, Cancel.
  • Improved malware protection capabilities, including enhanced rootkit detection and removal.
  • The Minimize button now minimizes the main program window to the taskbar instead of the tray.
  • The default display timeout for notifications was changed to 3 seconds instead of 7 seconds.
  • The default value for "Show notification after successful update" is now set to "Off" for all scheduled updates.
  • Removed the informational message from the main dashboard view.
  • Remove support for Thai language due to quality issues with the translation.
  • Installation of a Consumer/Home version of Malwarebytes Anti-Malware over a Business version is now blocked.

 

Issues Fixed:

  • Admin users should no longer see a prompt to login as admin to perform a program upgrade.
  • Fixed issue where the web protection service (MWAC) was not restarting properly.
  • Fixed numerous issues with scheduled scans, including showing the correct date for “Next scheduled scan” on the dashboard.
  • Fixed issue where mbamscheduler was starting on boot when Malwarebytes Anti-Malware was set not to start with Windows.
  • Fixed issue where any non-English language selected during installation would not be applied after installation.
  • Fixed issue where Malwarebytes Anti-Malware did not always automatically update the database on installation.
  • Fixed an issue where the “Delay Protection at startup for 15 seconds” setting showed as enabled, but was actually disabled.  (We recommend reviewing this option to ensure it is configured as you intended.)
  • Fixed issue where "Error Code 6" displayed at the end of scans.
  • Fixed issue on Windows XP where scheduled scans on reboot would not start if the "Enable self-protection module" was checked.
  • Malwarebytes Anti-Malware now honors self-protection settings detected from a previous installation.
  • Fixed issue where context menu scan was not honoring user selection under detection and protection setting.
  • Several issues with notifications were fixed.
  • Several enhancements were made to the user interface to address accessibility issues.
  • Several UI and user experience enhancements implemented.

 

Known Issues:

  • Certain elements of the user interface, such as tables, do not support screen readers.  We’ll continue to improve our support for accessibility-related items over the next several releases.   
  • The version information displayed the Protection Log for program updates is displaying an incorrect fourth digit.  The fourth digit represents the build number, and if curious, you can find the exact build on the About screen in Settings.
  • The informational messages that display during scans (and on the Scan Results page in the Free version) are only available in English for the time being.  We hope to provide translations for these in a future release.  There may be other minor issues around missing translations, which vary by specific language.

  • 3 седмици по-късно...

Здравейте!

Трябва ли да деинсталирам старата версия на МВАМ, да почистя с mbam-clean и да инсталирам новата, или ъпгрейда ще стане автоматично?

Здравейте!

Трябва ли да деинсталирам старата версия на МВАМ, да почистя с mbam-clean и да инсталирам новата, или ъпгрейда ще стане автоматично?

Обновяването при мен мина без проблеми автоматично.

Обновяването при мен мина без проблеми автоматично.

Аз още го нямам, А в настройките, съм задал да обновява и програмата.  :(

Говорим за 2.1.4.1018,предполагам...

Аз съм с 2,0,4, и си седи на нея. Няма ъпдейт. 

Добавете отговор

Можете да публикувате отговор сега и да се регистрирате по-късно. Ако имате регистрация, влезте в профила си за да публикувате от него.

Гост
Публикацията ви съдържа термини, които не допускаме! Моля, редактирайте съдържанието си и премахнете подчертаните думи по-долу. Ако замените букви от думата със звездички или друго, за да заобиколите това предупреждение, профилът ви ще бъде блокиран и наказан!
Напишете отговор в тази тема...

Разглеждащи това в момента 0

  • Няма регистрирани потребители разглеждащи тази страница.

Дарение

  • Подкрепи съществуването на форума - направи дарение
    25%
    Дарени 252.69 EUR от нужните 1,000.00 EUR

Бюлетин

Получавайте известие, когато има важна промяна или новина свързана с форума.

Профил

Навигация

Търсене

Търсене

Конфигуриране на push известия в браузъра

Chrome (Android)
  1. Докоснете иконата на катинар до адресната лента.
  2. Докоснете Разрешения → Известия.
  3. Променете предпочитанията си.
Chrome (Desktop)
  1. Кликнете върху иконата на катинар в адресната лента.
  2. Изберете Настройки на сайта.
  3. Намерете Известия и коригирайте предпочитанията си.