# locate msttcorefonts /usr/lib/msttcorefonts /usr/lib/msttcorefonts/update-ms-fonts /usr/share/fonts/truetype/msttcorefonts /usr/share/fonts/truetype/msttcorefonts/Andale_Mono.ttf /usr/share/fonts/truetype/msttcorefonts/Arial.ttf /usr/share/fonts/truetype/msttcorefonts/Arial_Black.ttf /usr/share/fonts/truetype/msttcorefonts/Arial_Bold.ttf /usr/share/fonts/truetype/msttcorefonts/Arial_Bold_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Arial_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Comic_Sans_MS.ttf /usr/share/fonts/truetype/msttcorefonts/Comic_Sans_MS_Bold.ttf /usr/share/fonts/truetype/msttcorefonts/Courier_New.ttf /usr/share/fonts/truetype/msttcorefonts/Courier_New_Bold.ttf /usr/share/fonts/truetype/msttcorefonts/Courier_New_Bold_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Courier_New_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Georgia.ttf /usr/share/fonts/truetype/msttcorefonts/Georgia_Bold.ttf /usr/share/fonts/truetype/msttcorefonts/Georgia_Bold_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Georgia_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Impact.ttf /usr/share/fonts/truetype/msttcorefonts/Times_New_Roman.ttf /usr/share/fonts/truetype/msttcorefonts/Times_New_Roman_Bold.ttf /usr/share/fonts/truetype/msttcorefonts/Times_New_Roman_Bold_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Times_New_Roman_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Trebuchet_MS.ttf /usr/share/fonts/truetype/msttcorefonts/Trebuchet_MS_Bold.ttf /usr/share/fonts/truetype/msttcorefonts/Trebuchet_MS_Bold_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Trebuchet_MS_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Verdana.ttf /usr/share/fonts/truetype/msttcorefonts/Verdana_Bold.ttf /usr/share/fonts/truetype/msttcorefonts/Verdana_Bold_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Verdana_Italic.ttf /usr/share/fonts/truetype/msttcorefonts/Webdings.ttf /usr/share/fonts/truetype/msttcorefonts/andalemo.ttf /usr/share/fonts/truetype/msttcorefonts/arial.ttf /usr/share/fonts/truetype/msttcorefonts/arialbd.ttf /usr/share/fonts/truetype/msttcorefonts/arialbi.ttf /usr/share/fonts/truetype/msttcorefonts/ariali.ttf /usr/share/fonts/truetype/msttcorefonts/ariblk.ttf /usr/share/fonts/truetype/msttcorefonts/comic.ttf /usr/share/fonts/truetype/msttcorefonts/comicbd.ttf /usr/share/fonts/truetype/msttcorefonts/cour.ttf /usr/share/fonts/truetype/msttcorefonts/courbd.ttf /usr/share/fonts/truetype/msttcorefonts/courbi.ttf /usr/share/fonts/truetype/msttcorefonts/couri.ttf /usr/share/fonts/truetype/msttcorefonts/georgia.ttf /usr/share/fonts/truetype/msttcorefonts/georgiab.ttf /usr/share/fonts/truetype/msttcorefonts/georgiai.ttf /usr/share/fonts/truetype/msttcorefonts/georgiaz.ttf /usr/share/fonts/truetype/msttcorefonts/impact.ttf /usr/share/fonts/truetype/msttcorefonts/times.ttf /usr/share/fonts/truetype/msttcorefonts/timesbd.ttf /usr/share/fonts/truetype/msttcorefonts/timesbi.ttf /usr/share/fonts/truetype/msttcorefonts/timesi.ttf /usr/share/fonts/truetype/msttcorefonts/trebuc.ttf /usr/share/fonts/truetype/msttcorefonts/trebucbd.ttf /usr/share/fonts/truetype/msttcorefonts/trebucbi.ttf /usr/share/fonts/truetype/msttcorefonts/trebucit.ttf /usr/share/fonts/truetype/msttcorefonts/verdana.ttf /usr/share/fonts/truetype/msttcorefonts/verdanab.ttf /usr/share/fonts/truetype/msttcorefonts/verdanai.ttf /usr/share/fonts/truetype/msttcorefonts/verdanaz.ttf /usr/share/fonts/truetype/msttcorefonts/webdings.ttf /var/lib/msttcorefonts /var/lib/msttcorefonts/ms-fonts Кажи къде да намеря намеря репозиторито в компа. В темата е описано и като набрах IP-то и ми се отвори точният сайт. Обаче в репозиторито, явно седи друго IP. Нали прочете цялата табелка с грешката? Казва ми, че нямам нет, т.е. не може да си намери репозиторито

Сега ще го разгледам.

Просто трябва да намеря точно този пакет и да го разархивирам. Това е цялата философия.

И със сигурност си мисля, че адреса не е по IP.

@ivo23, я виж какво ще стане, ако изпълниш тази команда като суперпотребител:

dpkg-reconfigure ttf-mscorefonts-installer

По-спeциално ме интересува дали можеш да въведеш адреса ръчно, дали ще успее да ги инсталира, а ако не каква грешка ще даде.

При неуспех също пробвай това:

dpkg-reconfigure -plow --force ttf-mscorefonts-installer

Редактирано 24 ноември 201213 г. от Melmak ® (преглед на промените)

Сега ще го разгледам.

Просто трябва да намеря точно този пакет и да го разархивирам. Това е цялата философия.

И със сигурност си мисля, че адреса не е по IP.

@ivo23, я виж какво ще стане, ако изпълниш тази команда като суперпотребител:

dpkg-reconfigure ttf-mscorefonts-installer

По-спeциално ме интересува дали можеш да въведеш адреса ръчно, дали ще успее да ги инсталира, а ако не каква грешка ще даде.

При неуспех също пробвай това:

dpkg-reconfigure -plow --force ttf-mscorefonts-installer

1 000 пъти ги правих тези гимнастики. Шрифтовете са инсталирани!!!

Не знам защо и какво търси тъпата програма, но ми казва, че и трябва интернет и хост към който да се свърже, но не успява!!!

Редактирано 24 ноември 201213 г. от ivo23 (преглед на промените)

Не е необходимо да се инсталира deb. пакет за да имаш определени шрифтове. Можеш да свалиш този архив

http://dox.bg/files/dw?a=3750602dd5

да го разархивираш и поставиш папката с шрифтове в папка usr/share/fonts.

Това е универсален начин за добавяне, независимо от вида на дистрибуцията.

Хора, аз ли съм тъп, тъпо обяснявам или говоря на патагонски?! Това чудо си търси автоматично някакво обновяване на пакетите със зареждането на ОС. В това е проблема, а не в пакетите. Пакетите са инсталирани и си седят там където трябва да си седят. Просто прочетете първото изречение на табелката, която съм снимал.

Хора, аз ли съм тъп, тъпо обяснявам или говоря на патагонски?!

Това чудо си търси автоматично някакво обновяване на пакетите със зареждането на ОС.

В това е проблема, а не в пакетите. Пакетите са инсталирани и си седят там където трябва да си седят.

Просто прочетете първото изречение на табелката, която съм снимал.

Иво, ти не си тъп, но не очаквай да сме умни колко на теб ти се иска.

Набери history, за да стане ясно какво поне си правил.

Ми хората в темата от форума на убунту са му намерили цаката, но аз не мога да я разбера и за това питах, но ме отсвириха... Нищо интересно няма в хисторито. 1 sudo apt-get update 2 sudo apt-get dist-upgrade 3 sudo apt-get update 4 htop 5 sudo apt-get install htop 6 htop 7 conky 8 sudo apt-get install conky lua 9 sudo apt-get install conky 10 conky 11 sudo apt-get update 12 sudo apt-get dist-upgrade 13 conky 14 conky/lua.lua 15 conkyrc1 16 sudo apt-get install python-feedparser 17 sudo apt-get install hddtemp 18 sudo apt-get install lm-sensors 19 conky 20 wget -O conky-yellow.zip http://dl.dropbox.com/u/53319850/NoobsLab.com/conky-yellow.zip 21 unzip conky-yellow.zip && sudo rm conky-yellow.zip 22 conku lua 23 sudo add-apt-repository ppa:conky-companions/ppa 24 sudo apt-get update && sudo apt-get install conkyforecast 25 conkyForecast -h 26 curl http://xoap.weather.com/search/search?where=Sofia 27 sudo apt-get install curl 28 curl http://xoap.weather.com/search/search?where=Sofia 29 1 30 nano conky.sh 31 feh 32 sudo apt-get install feh 33 nano conky.sh 34 chmod +x conky.sh 35 nano conky.sh 36 conky 37 conky lua 38 conky 39 conky rc 40 conkyrc 41 conky 42 wget -O conky-yellow.zip http://dl.dropbox.com/u/53319850/NoobsLab.com/conky-yellow.zip 43 unzip conky-yellow.zip && sudo rm conky-yellow.zip 44 sudo apt-get install gedit 45 conky lua 46 cd /home/mint/.local/share 47 mk contacts 48 make contacts 49 make /contacts 50 sudo su 51 sudo apt-get update 52 sudo apt-get dist-upgrade 53 sudo apt-get install alien 54 alien install_flash_player_11_linux_x86_64.tar.gz 55 sudo su 56 sudo apt-get update 57 sudo apt-get dist-upgrade 58 sudo apt-get update 59 sudo apt-get dist-upgrade 60 sudo apt-get update 61 sudo apt-get dist-upgrade 62 sudo apt-get autoremove 63 sudo apt-get autoclean 64 sudo apt-get update 65 htop 66 sudo apt-get update 67 sudo apt-get dist-upgrade 68 sudo apt-get update 69 sudo apt-get dist-upgrade 70 sudo apt-get install cmatrix 71 cmatrix 72 sudo apt-get update 73 sudo apt-get dist-upgrade 74 htop 75 sudo apt-get update 76 sudo apt-get dist-upgrade 77 sudo apt-get update 78 sudo apt-get dist-upgrade 79 xinput list 80 xinput -set-prop id 10 1 81 xinput -set-prop id10 1 82 xinput -set-prop id10 0 83 xinput -set-prop id15 1 84 sudo apt-get update 85 sudo apt-get dist-upgrade 86 htop 87 sudo apt-get update 88 sudo apt-get dist-upgrade 89 htop 90 sudo apt-get update 91 sudo apt-get dist-upgrade 92 sudo apt-get install conky-all 93 conky-all 94 conky 95 sudo nano /etc/conky/conky.conf 96 feh 97 start 98 conky 99 feh --bg-scale "`grep 'wallpaper=' ~/.kde4/share/config/plasma-appletsrc | tail --bytes=+11` 100 sudo nano /etc/conky/conky.conf 101 conky 102 sudo apt-get update 103 sudo apt-get dist-upgrade 104 sudo apt-get update 105 sudo apt-get dist-upgrade 106 ttf-mscorefonts-installer 107 sudo apt-get ttf-mscorefonts-installer 108 mscorefonts-installer 109 sudo add-apt-repository ppa:atareao/atareao 110 sudo apt-get update 111 sudo apt-get install my-weather-indicator 112 my-weather-indicator 113 sudo apt-get update 114 sudo apt-get dist-upgrade 115 sudo apt-get update 116 sudo apt-get dist-upgrade 117 sudo apt-get update 118 sudo apt-get dist-upgrade 119 tar -jxf yawp 120 sudo apt-get install cmake 121 yawp 122 sudo apt-get install yawp 123 run ./install.sh 124 cd build 125 cmake -DCMAKE_INSTALL_PREFIX=`kde4-config --prefix` .. 126 sudo alien yawp-0.4.3.tar.bz2 127 yawp 128 yawp-0.4.3 129 plasmapkg -u widget-file-name.plasmoid 130 htop 131 sudo apt-get update 132 sudo apt-get dist-upgrade 133 sudo apt-get autoremove 134 sudo apt-get update 135 sudo apt-get autoclean 136 sudo apt-get update 137 sudo apt-get upgrade 138 plasmoid 139 sudo apt-get update 140 sudo apt-get dist-upgrade 141 sudo apt-get update 142 sudo apt-get dist-upgrade 143 sudo apt-get update 144 sudo apt-get dist-upgrade 145 htop 146 sudo apt-get update 147 sudo apt-get dist-upgrade 148 sudo apt-get update 149 sudo apt-get dist-upgrade 150 sudo apt-get update 151 sudo apt-get dist-upgrade 152 sudo apt-get upgrade 153 conky 154 sudo apt-get update 155 sudo apt-get dist-upgrade 156 conky 157 htop 158 conky 159 sudo apt-get update 160 sudo apt-get dist-upgrade 161 sudo apt-get update 162 sudo apt-get dist-upgrade 163 sudo apt-get update 164 sudo apt-get dist-upgrade 165 sudo apt-get update 166 conky 167 sudo apt-get update 168 sudo apt-get dist-upgrade 169 htop 170 sudo apt-get update 171 sudo apt-get dist-upgrade 172 sudo apt-get update 173 sudo apt-get dist-upgrade 174 sudo apt-get update 175 sudo apt-get dist-upgrade 176 htop 177 conky 178 htop 179 sudo apt-get update 180 sudo apt-get dist-upgrade 181 conky 182 sudo apt-get update 183 sudo apt-get autoremove 184 sudo apt-get autoclean 185 conky 186 sudo apt-get update 187 sudo apt-get dist-upgrade 188 sudo apt-get update 189 sudo apt-get dist-upgrade 190 conky 191 acpi 192 sudo apt-get install acpi 193 sudo apt-get install lm-sensors 194 sudo apt-get install hddtemp 195 conky 196 conky_weather 197 conky 198 conky -c ~/v9000/conky_weather 199 cat /proc/net/route 200 "conky -c ~/v9000/conky_weather" 201 conky -c ~/v9000/conky_weather 202 conky 203 conky -c ~/v9000/conky_weather 204 cat /proc/net/route 205 sudo apt-get update 206 sudo apt-get dist-upgrade 207 iwconfig 208 wicd 209 sudo apt-get install wicd-daemon 210 conky 211 sudo apt-get update 212 sudo apt-get dist-upgrade 213 htop 214 sudo apt-get update 215 sudo apt-get dist-upgrade 216 sudo apt-get update 217 sudo apt-get dist-upgrade 218 sudo apt-get update 219 sudo apt-get dist-upgrade 220 sudo apt-get install python-feedparser 221 sudo apt-get update 222 sudo apt-get autoremove 223 sudo apt-get autoclean 224 sudo apt-get update 225 sudo apt-get dist-upgrade 226 sudo apt-get autoremove 227 sudo apt-get autoclean 228 conky 229 sudo apt-get update 230 sudo apt-get dist-upgrade 231 echo $'xc2xb0'C 232 conkysymbols.ttf 233 conky 234 sudo apt-get update 235 sudo apt-get dist-upgrade 236 iwconfig 237 --enable-wlan will build w/ RSS capability 238 wlan 239 /proc/net/route 240 /proc/net/route eth1 241 sudo su 242 if_existing /proc/net/route eth1 243 /proc/net/route eth1 244 iwconfig 245 conky -v 246 sudo apt-get install firmware-b43-installer 247 iwconfig 248 nc localhost 7634 249 echo $'xc2xb0'C 250 fc-cache -fv 251 msttcorefonts 252 sudo apt-get update 253 sudo apt-get dist-upgrade 254 sudo apt-get update 255 sudo apt-get dist-upgrade 256 sudo apt-get update 257 sudo apt-get dist-upgrade 258 sudo apt-get update 259 sudo apt-get dist-upgrade 260 sudo apt-get update 261 sudo apt-get dist-upgrade 262 pacman -S ttf-ms-fonts 263 sudo apt-get install pacman 264 pacman -S ttf-ms-fonts 265 sudo apt-get install --reinstall ttf-mscorefonts-installer 266 sudo apt-get update 267 sudo apt-get dist-upgrade 268 sudo apt-get install --reinstall ttf-mscorefonts-installer 269 sudo apt-get update 270 sudo apt-get dist-upgrade 271 sudo dpkg-reconfigure ttf-mscorefonts-installer 272 sudo apt-get update 273 sudo apt-get install --reinstall ttf-mscorefonts-installer 274 sudo dpkg-reconfigure ttf-mscorefonts-installer 275 sudo apt-get update 276 sudo apt-get dist-upgrade 277 sudo apt-get update 278 sudo apt-get dist-upgrade 279 sudo apt-get update 280 sudo apt-get dist-upgrade 281 sudo apt-get update 282 sudo apt-get dist-upgrade 283 cal 284 uname -a 285 sudo apt-get update 286 sudo apt-get dist-upgrade 287 sudo apt-get update 288 sudo apt-get dist-upgrade 289 sudo apt-get update && sudo apt-get install conkyforecast 290 sudo apt-get install conkyforecast 291 sudo apt-get update 292 sudo apt-get dist-upgrade 293 sudo apt-get update 294 sudo apt-get dist-upgrade 295 sudo gpkg-reconfigure locales 296 gpkg 297 lspci | grep VGA 298 sudo apt-get update 299 sudo apt-get install ttf-mscorefonts-installer 300 sudo apt-get dist-upgrade 301 sudo apt-get update 302 sudo apt-get dist-upgrade 303 htop 304 sudo apt-get update 305 sudo apt-get dist-upgrade 306 htop 307 hosts 308 sudo su 309 cd hosts 310 cd /hosts 311 cd ./hosts 312 cd hosts 313 cd /host 314 cd /hosts 315 sudo su 316 sudo dpkg-reconfigure ttf-mscorefonts-installer 317 sudo apt-get install --reinstall ttf-mscorefonts-installer 318 sudo apt-get install ubuntu-restricted-extras 319 sudo apt-get install --reinstall ttf-mscorefonts-installer 320 aptitude show ttf-mscorefonts-installer 321 dig iweb.dl.sourceforge.net 322 cat /etc/default/linux-restricted-modules-common 323 cat /etc/default/linux-restricted-modules 324 sudo apt-get install msttcorefonts 325 sudo su 326 sudo apt-get update 327 sudo apt-get dist-upgrade 328 sudo apt-get --purge --reinstall ttf-mscorefonts-installer 329 sudo fc-cache -fv 330 dig iweb.dl.sourceforge.net 331 sudo -i 332 sudo sh -c 'echo "deb http://deb.opera.com/opera/ stable non-free" >> 333 /etc/apt/sources.list.d/opera.list' 334 sudo sh -c 'echo "deb http://deb.opera.com/opera/ stable non-free" >> /etc/apt/sources.list.d/opera.list' 335 dig iweb.dl.sourceforge.net 336 sudo su 337 history В номер 335 е проблема

Хайде малко по-спокойно! Махни този пакет и повече не го слагай. След което добави фонтовете ръчно. Проблемът е в дефектен скрипт, който е свързан с този пакет.

Някой може ли да каже, читав ли е този драйвер, който ми препоръчва ОС или е по-добре друг да инсталирам?

2.5 Не са желателни прекомерните off-topic – мнения, които не са свързани с темата.

При теб тези мнения нещо зачестиха!

iovi

Някой може ли да каже, читав ли е този драйвер, който ми препоръчва ОС или е по-добре друг да инсталирам?

Нали ти го ползваш. Ако имаш нормална резолюция и видеото върви не те съветвам да пипаш нищо повече.

Питам щото разцъквам и CS, а нещо не ме радва много как играчите потъват в земята наполовина.... Иначе всичко друго си е ОК, филми, картина, резолюция...

Може проблемът да е от това, че я играеш под емулатор и ефективността е по- ниска. Не разбирам от игри, така, че не знам, дали твоята е налична сред тези, за които Valve осигири Steam.

На теория, по-горния е по-нов. По-новото не винаги е по-добро, но си струва да пробваш.

Колкото до предишната тема, файла в който трябва да променяш се казва hosts http://community.linuxmint.com/tutorial/view/159 . Там трябвало да създадеш нов ред от типа на:

216.34.181.96 sourceforge.net

Но това не е много добър начин за справяне с проблемът.

На теория, по-горния е по-нов. По-новото не винаги е по-добро, но си струва да пробваш.

Колкото до предишната тема, файла в който трябва да променяш се казва hosts http://community.lin...torial/view/159 . Там трябвало да създадеш нов ред от типа на:

216.34.181.96 sourceforge.net

Но това не е много добър начин за справяне с проблемът.

Този горният така или иначе не може да се инсталира. Мисълта ми беше за драйвер от страницата на производителя.

А за другото може да се пробвам да видя какъв ще е резултата

Мисълта ми беше за драйвер от страницата на производителя.

Аз не бих пробвал, освен ако няма пакет точно за това дистро, тази версия и тази архитектура. Иначе е доста повече играчка и човек не трябва да се сърди, когато не стане първите 4-5 пъти.

Здравейте другари линуксоиди!

За собствени нужди бе купен от мен нетбук, напук на пипълсите с планшети. Цел: осъзнаване, че размотаване на лаптоп е задоволяване на селски нагон и тоже възможност да клечиш по-лесно, когато яздиш порцелановото пони. Мда, тук има един равин и той наскоро се върна от Китай. Купил си галакси 3 за 200 бакса и тоже планшет за толкова. Мерим си тръбите с него кой е по-адвансед, то от мен го прихвана. Там в Китай хората културни, че даже продавачката на иврит му обяснявала за набутките. Толкоз лирически отклонения.

Обратно към болката. В името на народа бе решено да се сложи Lubuntu 12.04_64. Всичко гот, значи зареждане - стрела. С SSD диск пали за 9 секунди, а с редовния 5400об/мин диск също отличен. Бие декстопа по скорост - Ubuntu 10.04 на 7200об/мин. В един ден си направих мулти-boot флашка, за проба и подбор на дистро, да не се мина. Накатурих деятката на distro watch в флашката и започнах да разцъквам една по една какви хубости се предлагат.

Казват, че на жена й трябват 90 сек да се влюби. При мен бяха 25 сек и моята любов грабна Linux Mint 14 Mate 64 Nadia.

Първата чуденка е защо става така и има ли илач?

На заден план е стартиран терминал от менюто. На преден план от съдадени горещи клавиши. С клавиатурата е по-бързо, отколкото да ровя с мишка, еле пък с тачпад и е леко смущаващо да ме мята по върбите.

Искам, като гръмна терминала от клавиатурата, да ме плонжира в домашния каталог.

По-гадното е, че всичкото *buntu (Gnome, KDE, LXDE, Unity) показва един и същи женски каприз. Чете флаш-картата само ако предварително е пъхната преди рестарт или пуск на машината. Извадиш ли я - край. Последвало пъхане в карт-четеца е няма никой вкъщи.

За справка Knoppix също е дериват на Debian и под Knoppix мога да си ръчкам колко искам. Същото важи и за CentOS. Явно тук има магия, която ми бяга по тъч линията. Става въпрос за този хубавец:

SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10)

BCM57765 е някакво комбо желязо, защото управлява лан картата, wi-fi, четеца и bluetooth-a. Последният е 4-та версия и пълна нямка в всичко що прехвърлих. Ясно, че под джама е писано конкретно и там работи, но дядо Либен не баца с джамове, иска Mint 14.

помагайте и нека силата бъде с вас!

"Чете флаш-картата само ако предварително е пъхната преди рестарт или пуск на машината. Извадиш ли я - край. Последвало пъхане в карт-четеца е няма никой вкъщи." Това ли е проблема ? Това само за монтиране през четеца за карти ли се отнася или и за носителите, включени на USB вход ? Провери настройките на Caja.

Това се отнася само за карт-четеца. Машината изгасена. Пъхам картата. Изгрява. Монтирам, демонтирам, чета. Демонтирам ли я (umont бла-бла) и съответно извадя физически от слота, последвало пъхане няма никой. При usb-флашките всичко е нормално. И това важи за всички версии (10.хх ~ 12.xx) *buntu.

настройките на Caja? Дай сламка, едва от няколко часа съм и то да си сложа моите украшения.

mateconf-editor и после?

А след като я тикнеш и напишеш mount или fdisk -l вижда ли я

mount

/dev/sda7 on / type ext4 (rw,errors=remount-ro)

proc on /proc type proc (rw,noexec,nosuid,nodev)

sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)

none on /sys/fs/fuse/connections type fusectl (rw)

none on /sys/kernel/debug type debugfs (rw)

none on /sys/kernel/security type securityfs (rw)

udev on /dev type devtmpfs (rw,mode=0755)

devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)

tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)

none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)

none on /run/shm type tmpfs (rw,nosuid,nodev)

none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)

binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)

gvfsd-fuse on /run/user/profruit/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=profruit)

fdisk -l

без отговор

df -h

Filesystem Size Used Avail Use% Mounted on

/dev/sda7 49G 7.7G 38G 17% /

udev 1.9G 4.0K 1.9G 1% /dev

tmpfs 759M 1008K 758M 1% /run

none 5.0M 0 5.0M 0% /run/lock

none 1.9G 76K 1.9G 1% /run/shm

none 100M 12K 100M 1% /run/user

Каталози mnt и media са празни.

GUI Disk също не я вижда след изваждане и последвало пъхане.

A dmesg tail -f | dmesg

Редактирано 1 декември 201213 г. от tux (преглед на промените)

dmesg

[ 0.707607] ACPI: Power Button [PWRB]

[ 0.707661] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1

[ 0.707692] ACPI: Lid Switch [LID0]

[ 0.707739] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2

[ 0.707744] ACPI: Sleep Button [sLPB]

[ 0.707797] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

[ 0.707800] ACPI: Power Button [PWRF]

[ 0.707905] ACPI: Requesting acpi_cpufreq

[ 0.829484] ACPI: Battery Slot [bAT1] (battery present)

[ 0.829521] GHES: HEST is not enabled!

[ 0.829620] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled

[ 0.831309] Linux agpgart interface v0.103

[ 0.833109] brd: module loaded

[ 0.834044] loop: module loaded

[ 0.834170] ahci 0000:00:1f.2: >version 3.0

[ 0.834267] ahci 0000:00:1f.2: >irq 40 for MSI/MSI-X

[ 0.834308] ahci: SSS flag set, parallel bus scan disabled

[ 0.834336] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode

[ 0.834341] ahci 0000:00:1f.2: >flags: 64bit ncq stag pm led clo pio slum part ems apst

[ 0.834348] ahci 0000:00:1f.2: >setting latency timer to 64

[ 0.834784] scsi0 : ahci

[ 0.834892] scsi1 : ahci

[ 0.834975] scsi2 : ahci

[ 0.835055] scsi3 : ahci

[ 0.835113] ata1: SATA max UDMA/133 abar m2048@0xc0607000 port 0xc0607100 irq 40

[ 0.835115] ata2: DUMMY

[ 0.835117] ata3: DUMMY

[ 0.835119] ata4: DUMMY

[ 0.835501] Fixed MDIO Bus: probed

[ 0.835556] tun: Universal TUN/TAP device driver, 1.6

[ 0.835558] tun: © 1999-2004 Max Krasnyansky <[email protected]>

[ 0.835611] PPP generic driver version 2.4.2

[ 0.835663] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 0.835709] ehci_hcd 0000:00:1a.0: >setting latency timer to 64

[ 0.835714] ehci_hcd 0000:00:1a.0: >EHCI Host Controller

[ 0.835721] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1

[ 0.835760] ehci_hcd 0000:00:1a.0: >debug port 2

[ 0.839635] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported

[ 0.839655] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xc0609000

[ 0.848165] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00

[ 0.848209] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002

[ 0.848213] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.848216] usb usb1: >Product: EHCI Host Controller

[ 0.848219] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd

[ 0.848222] usb usb1: >SerialNumber: 0000:00:1a.0

[ 0.848382] hub 1-0:1.0: >USB hub found

[ 0.848389] hub 1-0:1.0: >2 ports detected

[ 0.848486] ehci_hcd 0000:00:1d.0: >setting latency timer to 64

[ 0.848491] ehci_hcd 0000:00:1d.0: >EHCI Host Controller

[ 0.848498] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2

[ 0.848531] ehci_hcd 0000:00:1d.0: >debug port 2

[ 0.852414] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported

[ 0.852434] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xc0608000

[ 0.864154] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00

[ 0.864193] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002

[ 0.864197] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.864200] usb usb2: >Product: EHCI Host Controller

[ 0.864203] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd

[ 0.864205] usb usb2: >SerialNumber: 0000:00:1d.0

[ 0.864328] hub 2-0:1.0: >USB hub found

[ 0.864333] hub 2-0:1.0: >2 ports detected

[ 0.864399] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 0.864419] uhci_hcd: USB Universal Host Controller Interface driver

[ 0.864477] usbcore: registered new interface driver libusual

[ 0.864525] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS1] at 0x60,0x64 irq 1,12

[ 0.882142] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.882150] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 0.882285] mousedev: PS/2 mouse device common for all mice

[ 0.883802] rtc_cmos 00:08: >RTC can wake from S4

[ 0.883945] rtc_cmos 00:08: >rtc core: registered rtc_cmos as rtc0

[ 0.883978] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs

[ 0.884074] device-mapper: uevent: version 1.0.3

[ 0.884167] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]

[ 0.884232] cpuidle: using governor ladder

[ 0.884308] cpuidle: using governor menu

[ 0.884311] EFI Variables Facility v0.08 2004-May-17

[ 0.884605] ashmem: initialized

[ 0.884751] TCP: cubic registered

[ 0.884903] NET: Registered protocol family 10

[ 0.885173] NET: Registered protocol family 17

[ 0.885188] Key type dns_resolver registered

[ 0.885543] PM: Hibernation image not present or could not be loaded.

[ 0.885561] registered taskstats version 1

[ 0.889214] Key type trusted registered

[ 0.891862] Key type encrypted registered

[ 0.895154] Magic number: 8:189:240

[ 0.895262] rtc_cmos 00:08: >setting system clock to 2012-12-01 18:13:55 UTC (1354385635)

[ 0.895850] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 0.895854] EDD information not available.

[ 0.900280] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4

[ 1.132113] [Firmware Bug]: battery: (dis)charge rate invalid.

[ 1.132160] ACPI: Battery Slot [bAT1] (battery present)

[ 1.152061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 1.154395] ata1.00: ATA-8: ST320LT020-9YG142, 0010SDM1, max UDMA/133

[ 1.154402] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)

[ 1.157015] ata1.00: configured for UDMA/133

[ 1.157345] scsi 0:0:0:0: >Direct-Access ATA ST320LT020-9YG14 0010 PQ: 0 ANSI: 5

[ 1.157555] sd 0:0:0:0: >Attached scsi generic sg0 type 0

[ 1.157568] sd 0:0:0:0: >[sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)

[ 1.157573] sd 0:0:0:0: >[sda] 4096-byte physical blocks

[ 1.157635] sd 0:0:0:0: >[sda] Write Protect is off

[ 1.157639] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00

[ 1.157665] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.159994] usb 1-1: >new high-speed USB device number 2 using ehci_hcd

[ 1.250002] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >

[ 1.251095] sd 0:0:0:0: >[sda] Attached SCSI disk

[ 1.253352] Freeing unused kernel memory: 928k freed

[ 1.253522] Write protecting the kernel read-only data: 12288k

[ 1.260374] Freeing unused kernel memory: 1472k freed

[ 1.265676] Freeing unused kernel memory: 1124k freed

[ 1.290044] udevd[98]: starting version 175

[ 1.292301] usb 1-1: >New USB device found, idVendor=8087, idProduct=0024

[ 1.292307] usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.292591] hub 1-1:1.0: >USB hub found

[ 1.293273] hub 1-1:1.0: >4 ports detected

[ 1.387412] sdhci: Secure Digital Host Controller Interface driver

[ 1.387417] sdhci: Copyright© Pierre Ossman

[ 1.387800] sdhci-pci 0000:04:00.1: >SDHCI controller found [14e4:16bc] (rev 10)

[ 1.394004] sdhci-pci 0000:04:00.1: >Invalid iomem size. You may experience problems.

[ 1.394131] mmc0: no vmmc regulator found

[ 1.394217] Registered led device: mmc0::

[ 1.403833] usb 2-1: >new high-speed USB device number 2 using ehci_hcd

[ 1.423900] mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA

[ 1.424137] tg3.c:v3.123 (March 21, 2012)

[ 1.459525] tg3 0000:04:00.0: >eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:0a:bd:11

[ 1.459532] tg3 0000:04:00.0: >eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])

[ 1.459536] tg3 0000:04:00.0: >eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]

[ 1.459540] tg3 0000:04:00.0: >eth0: dma_rwctrl[00000001] dma_mask[64-bit]

[ 1.536165] usb 2-1: >New USB device found, idVendor=8087, idProduct=0024

[ 1.536175] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.536563] hub 2-1:1.0: >USB hub found

[ 1.536646] hub 2-1:1.0: >4 ports detected

[ 1.607870] usb 1-1.1: >new full-speed USB device number 3 using ehci_hcd

[ 1.663655] Refined TSC clocksource calibration: 1297.053 MHz.

[ 1.663662] Switching to clocksource tsc

[ 1.701301] usb 1-1.1: >string descriptor 0 read error: -22

[ 1.701313] usb 1-1.1: >New USB device found, idVendor=0489, idProduct=e04e

[ 1.701318] usb 1-1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 1.771767] usb 1-1.3: >new high-speed USB device number 4 using ehci_hcd

[ 1.915428] usb 1-1.3: >New USB device found, idVendor=064e, idProduct=d251

[ 1.915438] usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 1.915444] usb 1-1.3: >Product: HD WebCam

[ 1.915458] usb 1-1.3: >Manufacturer: SuYin

[ 1.915460] usb 1-1.3: >SerialNumber: HF1016-A21U-OV02-VA-R01.00.03

[ 1.987638] usb 2-1.4: >new low-speed USB device number 3 using ehci_hcd

[ 2.084702] usb 2-1.4: >New USB device found, idVendor=0461, idProduct=4d62

[ 2.084713] usb 2-1.4: >New USB device strings: Mfr=0, Product=2, SerialNumber=0

[ 2.084719] usb 2-1.4: >Product: HP Laser Mobile Mouse

[ 2.111410] usbcore: registered new interface driver usbhid

[ 2.111414] usbhid: USB HID core driver

[ 2.114232] input: HP Laser Mobile Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5

[ 2.114405] hid-generic 0003:0461:4D62.0001: >input,hidraw0: USB HID v1.11 Mouse [HP Laser Mobile Mouse] on usb-0000:00:1d.0-1.4/input0

[ 3.009326] EXT4-fs (sda7): INFO: recovery required on readonly filesystem

[ 3.009332] EXT4-fs (sda7): write access will be enabled during recovery

[ 6.736772] EXT4-fs (sda7): recovery complete

[ 6.744275] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)

[ 24.059465] Adding 999420k swap on /dev/sda5. Priority:-1 extents:1 across:999420k

[ 24.067636] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 24.105552] udevd[381]: starting version 175

[ 24.159444] lp: driver loaded but no devices found

[ 24.220534] wmi: Mapper loaded

[ 24.289683] mei 0000:00:16.0: >setting latency timer to 64

[ 24.289776] mei 0000:00:16.0: >irq 41 for MSI/MSI-X

[ 24.302623] mei 0000:00:16.0: >wd: failed to find the client

[ 24.306064] Linux video capture interface: v2.00

[ 24.312107] uvcvideo: Found UVC 1.00 device HD WebCam (064e:d251)

[ 24.317578] [drm] Initialized drm 1.1.0 20060810

[ 24.322068] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6

[ 24.322723] usbcore: registered new interface driver uvcvideo

[ 24.322727] USB Video Class driver (1.1.1)

[ 24.334707] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region PMIO 1 (20120320/utaddress-251)

[ 24.334719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 24.334722] lpc_ich: Resource conflict(s) found affecting iTCO_wdt

[ 24.334726] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region PMIO 1 (20120320/utaddress-251)

[ 24.334732] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 24.334737] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region GPIO 1 (20120320/utaddress-251)

[ 24.334742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 24.334744] lpc_ich: Resource conflict(s) found affecting gpio_ich

[ 24.344239] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro

[ 24.350030] cfg80211: Calling CRDA to update world regulatory domain

[ 24.382565] Bluetooth: Core ver 2.16

[ 24.384136] NET: Registered protocol family 31

[ 24.384140] Bluetooth: HCI device and connection manager initialized

[ 24.384143] Bluetooth: HCI socket layer initialized

[ 24.384145] Bluetooth: L2CAP socket layer initialized

[ 24.384155] Bluetooth: SCO socket layer initialized

[ 24.415433] usbcore: registered new interface driver btusb

[ 24.415701] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26

[ 24.421073] i915 0000:00:02.0: >setting latency timer to 64

[ 24.422057] pci 0000:00:00.0: >Intel Sandybridge Chipset

[ 24.422172] pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable

[ 24.423123] pci 0000:00:00.0: >detected 131072K stolen memory

[ 24.488574] ath: EEPROM regdomain: 0x6c

[ 24.488579] ath: EEPROM indicates we should expect a direct regpair map

[ 24.488583] ath: Country alpha2 being used: 00

[ 24.488585] ath: Regpair used: 0x6c

[ 24.488589] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488592] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488595] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488597] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488599] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488602] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488604] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488607] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488609] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488611] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488613] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488616] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488618] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488621] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488623] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488625] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488627] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488630] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488632] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488635] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488637] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488639] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488641] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488644] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488646] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488649] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488651] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel

[ 24.488653] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488656] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488658] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488661] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488663] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488665] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488667] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488670] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488672] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488675] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488677] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488679] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488681] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488684] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488686] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488688] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488691] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488693] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488695] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488698] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488700] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488703] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488705] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488707] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488709] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488712] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488714] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488717] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488719] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488721] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488723] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488726] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488728] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488731] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488733] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488735] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488737] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488740] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488742] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488745] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488747] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488749] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488751] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488754] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488756] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488759] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488761] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488763] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.492342] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain

[ 24.514581] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'

[ 24.616834] Registered led device: ath9k-phy0

[ 24.616848] ieee80211 phy0: >Atheros AR9462 Rev:2 mem=0xffffc90011180000, irq=17

[ 24.627406] i915 0000:00:02.0: >irq 42 for MSI/MSI-X

[ 24.627421] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).

[ 24.627423] [drm] Driver supports precise vblank timestamp query.

[ 24.627478] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem

[ 24.720263] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 24.720268] Bluetooth: BNEP filters: protocol multicast

[ 24.729529] Bluetooth: RFCOMM TTY layer initialized

[ 24.729537] Bluetooth: RFCOMM socket layer initialized

[ 24.729539] Bluetooth: RFCOMM ver 1.11

[ 24.733516] ppdev: user-space parallel port driver

[ 24.826743] init: failsafe main process (633) killed by TERM signal

[ 25.013472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 25.016913] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 25.026041] acer_wmi: Acer Laptop ACPI-WMI Extras

[ 25.026061] acer_wmi: Function bitmap for Communication Button: 0x801

[ 25.028136] tg3 0000:04:00.0: >irq 43 for MSI/MSI-X

[ 25.028149] tg3 0000:04:00.0: >irq 44 for MSI/MSI-X

[ 25.028159] tg3 0000:04:00.0: >irq 45 for MSI/MSI-X

[ 25.112083] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain

[ 25.115537] cfg80211: World regulatory domain updated:

[ 25.115539] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 25.115542] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 25.115545] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 25.115548] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 25.115550] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 25.115552] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 25.142703] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26

[ 25.145762] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba

[ 25.602629] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 25.603257] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 25.623119] input: Acer WMI hotkeys as /devices/virtual/input/input7

[ 25.624905] input: Acer BMA150 accelerometer as /devices/virtual/input/input8

[ 25.718462] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off

[ 25.884045] fbcon: inteldrmfb (fb0) is primary device

[ 25.884273] Console: switching to colour frame buffer device 170x48

[ 25.884305] fb0: inteldrmfb frame buffer device

[ 25.884307] drm: registered panic notifier

[ 25.886034] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)

[ 25.888230] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9

[ 25.888344] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

[ 25.888490] snd_hda_intel 0000:00:1b.0: >irq 46 for MSI/MSI-X

[ 25.912466] psmouse serio1: >synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00

[ 25.990603] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10

[ 26.455192] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11

[ 26.455398] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12

[ 28.515500] init: plymouth-stop pre-start process (1445) terminated with status 1

[ 33.383336] wlan0: authenticate with 20:4e:7f:2a:76:21

[ 33.401965] wlan0: send auth to 20:4e:7f:2a:76:21 (try 1/3)

[ 33.406152] wlan0: authenticated

[ 33.412295] wlan0: associate with 20:4e:7f:2a:76:21 (try 1/3)

[ 33.416169] wlan0: RX AssocResp from 20:4e:7f:2a:76:21 (capab=0x411 status=0 aid=7)

[ 33.416263] wlan0: associated

[ 33.416912] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 7973.483378] mmc0: Timeout waiting for hardware interrupt.

[ 7983.493263] mmc0: Timeout waiting for hardware interrupt.

[ 7993.503107] mmc0: Timeout waiting for hardware interrupt.

[ 8003.513045] mmc0: Timeout waiting for hardware interrupt.

...

[ .........] mmc0: Timeout waiting for hardware interrupt.

tail -f | dmesg

[ 0.707607] ACPI: Power Button [PWRB]

[ 0.707661] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1

[ 0.707692] ACPI: Lid Switch [LID0]

[ 0.707739] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2

[ 0.707744] ACPI: Sleep Button [sLPB]

[ 0.707797] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

[ 0.707800] ACPI: Power Button [PWRF]

[ 0.707905] ACPI: Requesting acpi_cpufreq

[ 0.829484] ACPI: Battery Slot [bAT1] (battery present)

[ 0.829521] GHES: HEST is not enabled!

[ 0.829620] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled

[ 0.831309] Linux agpgart interface v0.103

[ 0.833109] brd: module loaded

[ 0.834044] loop: module loaded

[ 0.834170] ahci 0000:00:1f.2: >version 3.0

[ 0.834267] ahci 0000:00:1f.2: >irq 40 for MSI/MSI-X

[ 0.834308] ahci: SSS flag set, parallel bus scan disabled

[ 0.834336] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode

[ 0.834341] ahci 0000:00:1f.2: >flags: 64bit ncq stag pm led clo pio slum part ems apst

[ 0.834348] ahci 0000:00:1f.2: >setting latency timer to 64

[ 0.834784] scsi0 : ahci

[ 0.834892] scsi1 : ahci

[ 0.834975] scsi2 : ahci

[ 0.835055] scsi3 : ahci

[ 0.835113] ata1: SATA max UDMA/133 abar m2048@0xc0607000 port 0xc0607100 irq 40

[ 0.835115] ata2: DUMMY

[ 0.835117] ata3: DUMMY

[ 0.835119] ata4: DUMMY

[ 0.835501] Fixed MDIO Bus: probed

[ 0.835556] tun: Universal TUN/TAP device driver, 1.6

[ 0.835558] tun: © 1999-2004 Max Krasnyansky <[email protected]>

[ 0.835611] PPP generic driver version 2.4.2

[ 0.835663] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 0.835709] ehci_hcd 0000:00:1a.0: >setting latency timer to 64

[ 0.835714] ehci_hcd 0000:00:1a.0: >EHCI Host Controller

[ 0.835721] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1

[ 0.835760] ehci_hcd 0000:00:1a.0: >debug port 2

[ 0.839635] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported

[ 0.839655] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xc0609000

[ 0.848165] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00

[ 0.848209] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002

[ 0.848213] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.848216] usb usb1: >Product: EHCI Host Controller

[ 0.848219] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd

[ 0.848222] usb usb1: >SerialNumber: 0000:00:1a.0

[ 0.848382] hub 1-0:1.0: >USB hub found

[ 0.848389] hub 1-0:1.0: >2 ports detected

[ 0.848486] ehci_hcd 0000:00:1d.0: >setting latency timer to 64

[ 0.848491] ehci_hcd 0000:00:1d.0: >EHCI Host Controller

[ 0.848498] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2

[ 0.848531] ehci_hcd 0000:00:1d.0: >debug port 2

[ 0.852414] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported

[ 0.852434] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xc0608000

[ 0.864154] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00

[ 0.864193] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002

[ 0.864197] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.864200] usb usb2: >Product: EHCI Host Controller

[ 0.864203] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd

[ 0.864205] usb usb2: >SerialNumber: 0000:00:1d.0

[ 0.864328] hub 2-0:1.0: >USB hub found

[ 0.864333] hub 2-0:1.0: >2 ports detected

[ 0.864399] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 0.864419] uhci_hcd: USB Universal Host Controller Interface driver

[ 0.864477] usbcore: registered new interface driver libusual

[ 0.864525] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS1] at 0x60,0x64 irq 1,12

[ 0.882142] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.882150] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 0.882285] mousedev: PS/2 mouse device common for all mice

[ 0.883802] rtc_cmos 00:08: >RTC can wake from S4

[ 0.883945] rtc_cmos 00:08: >rtc core: registered rtc_cmos as rtc0

[ 0.883978] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs

[ 0.884074] device-mapper: uevent: version 1.0.3

[ 0.884167] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]

[ 0.884232] cpuidle: using governor ladder

[ 0.884308] cpuidle: using governor menu

[ 0.884311] EFI Variables Facility v0.08 2004-May-17

[ 0.884605] ashmem: initialized

[ 0.884751] TCP: cubic registered

[ 0.884903] NET: Registered protocol family 10

[ 0.885173] NET: Registered protocol family 17

[ 0.885188] Key type dns_resolver registered

[ 0.885543] PM: Hibernation image not present or could not be loaded.

[ 0.885561] registered taskstats version 1

[ 0.889214] Key type trusted registered

[ 0.891862] Key type encrypted registered

[ 0.895154] Magic number: 8:189:240

[ 0.895262] rtc_cmos 00:08: >setting system clock to 2012-12-01 18:13:55 UTC (1354385635)

[ 0.895850] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 0.895854] EDD information not available.

[ 0.900280] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4

[ 1.132113] [Firmware Bug]: battery: (dis)charge rate invalid.

[ 1.132160] ACPI: Battery Slot [bAT1] (battery present)

[ 1.152061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 1.154395] ata1.00: ATA-8: ST320LT020-9YG142, 0010SDM1, max UDMA/133

[ 1.154402] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)

[ 1.157015] ata1.00: configured for UDMA/133

[ 1.157345] scsi 0:0:0:0: >Direct-Access ATA ST320LT020-9YG14 0010 PQ: 0 ANSI: 5

[ 1.157555] sd 0:0:0:0: >Attached scsi generic sg0 type 0

[ 1.157568] sd 0:0:0:0: >[sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)

[ 1.157573] sd 0:0:0:0: >[sda] 4096-byte physical blocks

[ 1.157635] sd 0:0:0:0: >[sda] Write Protect is off

[ 1.157639] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00

[ 1.157665] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.159994] usb 1-1: >new high-speed USB device number 2 using ehci_hcd

[ 1.250002] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >

[ 1.251095] sd 0:0:0:0: >[sda] Attached SCSI disk

[ 1.253352] Freeing unused kernel memory: 928k freed

[ 1.253522] Write protecting the kernel read-only data: 12288k

[ 1.260374] Freeing unused kernel memory: 1472k freed

[ 1.265676] Freeing unused kernel memory: 1124k freed

[ 1.290044] udevd[98]: starting version 175

[ 1.292301] usb 1-1: >New USB device found, idVendor=8087, idProduct=0024

[ 1.292307] usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.292591] hub 1-1:1.0: >USB hub found

[ 1.293273] hub 1-1:1.0: >4 ports detected

[ 1.387412] sdhci: Secure Digital Host Controller Interface driver

[ 1.387417] sdhci: Copyright© Pierre Ossman

[ 1.387800] sdhci-pci 0000:04:00.1: >SDHCI controller found [14e4:16bc] (rev 10)

[ 1.394004] sdhci-pci 0000:04:00.1: >Invalid iomem size. You may experience problems.

[ 1.394131] mmc0: no vmmc regulator found

[ 1.394217] Registered led device: mmc0::

[ 1.403833] usb 2-1: >new high-speed USB device number 2 using ehci_hcd

[ 1.423900] mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA

[ 1.424137] tg3.c:v3.123 (March 21, 2012)

[ 1.459525] tg3 0000:04:00.0: >eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:0a:bd:11

[ 1.459532] tg3 0000:04:00.0: >eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])

[ 1.459536] tg3 0000:04:00.0: >eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]

[ 1.459540] tg3 0000:04:00.0: >eth0: dma_rwctrl[00000001] dma_mask[64-bit]

[ 1.536165] usb 2-1: >New USB device found, idVendor=8087, idProduct=0024

[ 1.536175] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.536563] hub 2-1:1.0: >USB hub found

[ 1.536646] hub 2-1:1.0: >4 ports detected

[ 1.607870] usb 1-1.1: >new full-speed USB device number 3 using ehci_hcd

[ 1.663655] Refined TSC clocksource calibration: 1297.053 MHz.

[ 1.663662] Switching to clocksource tsc

[ 1.701301] usb 1-1.1: >string descriptor 0 read error: -22

[ 1.701313] usb 1-1.1: >New USB device found, idVendor=0489, idProduct=e04e

[ 1.701318] usb 1-1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 1.771767] usb 1-1.3: >new high-speed USB device number 4 using ehci_hcd

[ 1.915428] usb 1-1.3: >New USB device found, idVendor=064e, idProduct=d251

[ 1.915438] usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 1.915444] usb 1-1.3: >Product: HD WebCam

[ 1.915458] usb 1-1.3: >Manufacturer: SuYin

[ 1.915460] usb 1-1.3: >SerialNumber: HF1016-A21U-OV02-VA-R01.00.03

[ 1.987638] usb 2-1.4: >new low-speed USB device number 3 using ehci_hcd

[ 2.084702] usb 2-1.4: >New USB device found, idVendor=0461, idProduct=4d62

[ 2.084713] usb 2-1.4: >New USB device strings: Mfr=0, Product=2, SerialNumber=0

[ 2.084719] usb 2-1.4: >Product: HP Laser Mobile Mouse

[ 2.111410] usbcore: registered new interface driver usbhid

[ 2.111414] usbhid: USB HID core driver

[ 2.114232] input: HP Laser Mobile Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5

[ 2.114405] hid-generic 0003:0461:4D62.0001: >input,hidraw0: USB HID v1.11 Mouse [HP Laser Mobile Mouse] on usb-0000:00:1d.0-1.4/input0

[ 3.009326] EXT4-fs (sda7): INFO: recovery required on readonly filesystem

[ 3.009332] EXT4-fs (sda7): write access will be enabled during recovery

[ 6.736772] EXT4-fs (sda7): recovery complete

[ 6.744275] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)

[ 24.059465] Adding 999420k swap on /dev/sda5. Priority:-1 extents:1 across:999420k

[ 24.067636] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 24.105552] udevd[381]: starting version 175

[ 24.159444] lp: driver loaded but no devices found

[ 24.220534] wmi: Mapper loaded

[ 24.289683] mei 0000:00:16.0: >setting latency timer to 64

[ 24.289776] mei 0000:00:16.0: >irq 41 for MSI/MSI-X

[ 24.302623] mei 0000:00:16.0: >wd: failed to find the client

[ 24.306064] Linux video capture interface: v2.00

[ 24.312107] uvcvideo: Found UVC 1.00 device HD WebCam (064e:d251)

[ 24.317578] [drm] Initialized drm 1.1.0 20060810

[ 24.322068] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6

[ 24.322723] usbcore: registered new interface driver uvcvideo

[ 24.322727] USB Video Class driver (1.1.1)

[ 24.334707] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region PMIO 1 (20120320/utaddress-251)

[ 24.334719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 24.334722] lpc_ich: Resource conflict(s) found affecting iTCO_wdt

[ 24.334726] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region PMIO 1 (20120320/utaddress-251)

[ 24.334732] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 24.334737] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region GPIO 1 (20120320/utaddress-251)

[ 24.334742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 24.334744] lpc_ich: Resource conflict(s) found affecting gpio_ich

[ 24.344239] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro

[ 24.350030] cfg80211: Calling CRDA to update world regulatory domain

[ 24.382565] Bluetooth: Core ver 2.16

[ 24.384136] NET: Registered protocol family 31

[ 24.384140] Bluetooth: HCI device and connection manager initialized

[ 24.384143] Bluetooth: HCI socket layer initialized

[ 24.384145] Bluetooth: L2CAP socket layer initialized

[ 24.384155] Bluetooth: SCO socket layer initialized

[ 24.415433] usbcore: registered new interface driver btusb

[ 24.415701] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26

[ 24.421073] i915 0000:00:02.0: >setting latency timer to 64

[ 24.422057] pci 0000:00:00.0: >Intel Sandybridge Chipset

[ 24.422172] pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable

[ 24.423123] pci 0000:00:00.0: >detected 131072K stolen memory

[ 24.488574] ath: EEPROM regdomain: 0x6c

[ 24.488579] ath: EEPROM indicates we should expect a direct regpair map

[ 24.488583] ath: Country alpha2 being used: 00

[ 24.488585] ath: Regpair used: 0x6c

[ 24.488589] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488592] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488595] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488597] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488599] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488602] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488604] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488607] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488609] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488611] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488613] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488616] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488618] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488621] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488623] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488625] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488627] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488630] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488632] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488635] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488637] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488639] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488641] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488644] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488646] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488649] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[ 24.488651] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel

[ 24.488653] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488656] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488658] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488661] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488663] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488665] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488667] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488670] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488672] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488675] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488677] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488679] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488681] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488684] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488686] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488688] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488691] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488693] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488695] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488698] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488700] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488703] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488705] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488707] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488709] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488712] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488714] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488717] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488719] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488721] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488723] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488726] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488728] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488731] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488733] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488735] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488737] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488740] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488742] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488745] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488747] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488749] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488751] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488754] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488756] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488759] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.488761] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:

[ 24.488763] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[ 24.492342] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain

[ 24.514581] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'

[ 24.616834] Registered led device: ath9k-phy0

[ 24.616848] ieee80211 phy0: >Atheros AR9462 Rev:2 mem=0xffffc90011180000, irq=17

[ 24.627406] i915 0000:00:02.0: >irq 42 for MSI/MSI-X

[ 24.627421] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).

[ 24.627423] [drm] Driver supports precise vblank timestamp query.

[ 24.627478] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem

[ 24.720263] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 24.720268] Bluetooth: BNEP filters: protocol multicast

[ 24.729529] Bluetooth: RFCOMM TTY layer initialized

[ 24.729537] Bluetooth: RFCOMM socket layer initialized

[ 24.729539] Bluetooth: RFCOMM ver 1.11

[ 24.733516] ppdev: user-space parallel port driver

[ 24.826743] init: failsafe main process (633) killed by TERM signal

[ 25.013472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 25.016913] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 25.026041] acer_wmi: Acer Laptop ACPI-WMI Extras

[ 25.026061] acer_wmi: Function bitmap for Communication Button: 0x801

[ 25.028136] tg3 0000:04:00.0: >irq 43 for MSI/MSI-X

[ 25.028149] tg3 0000:04:00.0: >irq 44 for MSI/MSI-X

[ 25.028159] tg3 0000:04:00.0: >irq 45 for MSI/MSI-X

[ 25.112083] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain

[ 25.115537] cfg80211: World regulatory domain updated:

[ 25.115539] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 25.115542] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 25.115545] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 25.115548] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 25.115550] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 25.115552] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 25.142703] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26

[ 25.145762] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba

[ 25.602629] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 25.603257] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 25.623119] input: Acer WMI hotkeys as /devices/virtual/input/input7

[ 25.624905] input: Acer BMA150 accelerometer as /devices/virtual/input/input8

[ 25.718462] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off

[ 25.884045] fbcon: inteldrmfb (fb0) is primary device

[ 25.884273] Console: switching to colour frame buffer device 170x48

[ 25.884305] fb0: inteldrmfb frame buffer device

[ 25.884307] drm: registered panic notifier

[ 25.886034] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)

[ 25.888230] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9

[ 25.888344] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

[ 25.888490] snd_hda_intel 0000:00:1b.0: >irq 46 for MSI/MSI-X

[ 25.912466] psmouse serio1: >synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00

[ 25.990603] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10

[ 26.455192] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11

[ 26.455398] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12

[ 28.515500] init: plymouth-stop pre-start process (1445) terminated with status 1

[ 33.383336] wlan0: authenticate with 20:4e:7f:2a:76:21

[ 33.401965] wlan0: send auth to 20:4e:7f:2a:76:21 (try 1/3)

[ 33.406152] wlan0: authenticated

[ 33.412295] wlan0: associate with 20:4e:7f:2a:76:21 (try 1/3)

[ 33.416169] wlan0: RX AssocResp from 20:4e:7f:2a:76:21 (capab=0x411 status=0 aid=7)

[ 33.416263] wlan0: associated

[ 33.416912] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 7973.483378] mmc0: Timeout waiting for hardware interrupt.

[ 7983.493263] mmc0: Timeout waiting for hardware interrupt.

[ 7993.503107] mmc0: Timeout waiting for hardware interrupt.

[ 8003.513045] mmc0: Timeout waiting for hardware interrupt.

[ 8013.522923] mmc0: Timeout waiting for hardware interrupt.

[ 8023.532762] mmc0: Timeout waiting for hardware interrupt.

[ 8033.542707] mmc0: Timeout waiting for hardware interrupt.

[ 8043.552589] mmc0: Timeout waiting for hardware interrupt.

[ 8053.562469] mmc0: Timeout waiting for hardware interrupt.

[ 8063.572348] mmc0: Timeout waiting for hardware interrupt.

[ 8073.582244] mmc0: Timeout waiting for hardware interrupt.

[ 8083.624108] mmc0: Timeout waiting for hardware interrupt.

[ 8093.633976] mmc0: Timeout waiting for hardware interrupt.

[ 8103.643878] mmc0: Timeout waiting for hardware interrupt.

[ 8113.653765] mmc0: Timeout waiting for hardware interrupt.

[ 8123.663646] mmc0: Timeout waiting for hardware interrupt.

[ 8133.673535] mmc0: Timeout waiting for hardware interrupt.

[ 8143.683405] mmc0: Timeout waiting for hardware interrupt.

[ 8153.693250] mmc0: Timeout waiting for hardware interrupt.

[ 8163.703174] mmc0: Timeout waiting for hardware interrupt.

[ 8173.713075] mmc0: Timeout waiting for hardware interrupt.

[ 8183.722903] mmc0: Timeout waiting for hardware interrupt.

[ 8193.732790] mmc0: Timeout waiting for hardware interrupt.

[ 8203.742686] mmc0: Timeout waiting for hardware interrupt.

[ 8213.784597] mmc0: Timeout waiting for hardware interrupt.

[ 8223.794420] mmc0: Timeout waiting for hardware interrupt.

[ 8233.804356] mmc0: Timeout waiting for hardware interrupt.

[ 8243.814247] mmc0: Timeout waiting for hardware interrupt.

[ 8253.824078] mmc0: Timeout waiting for hardware interrupt.

[ 8263.833964] mmc0: Timeout waiting for hardware interrupt.

[ 8273.843897] mmc0: Timeout waiting for hardware interrupt.

[ 8283.853733] mmc0: Timeout waiting for hardware interrupt.

[ 8293.863611] mmc0: Timeout waiting for hardware interrupt.

[ 8303.873509] mmc0: Timeout waiting for hardware interrupt.

[ 8313.883441] mmc0: Timeout waiting for hardware interrupt.

[ 8323.893329] mmc0: Timeout waiting for hardware interrupt.

[ 8333.903155] mmc0: Timeout waiting for hardware interrupt.

[ 8343.945022] mmc0: Timeout waiting for hardware interrupt.

[ 8353.954965] mmc0: Timeout waiting for hardware interrupt.

[ 8363.964798] mmc0: Timeout waiting for hardware interrupt.

[ 8373.974726] mmc0: Timeout waiting for hardware interrupt.

[ 8383.984601] mmc0: Timeout waiting for hardware interrupt.

[ 8393.994446] mmc0: Timeout waiting for hardware interrupt.

[ 8404.004392] mmc0: Timeout waiting for hardware interrupt.

[ 8414.014226] mmc0: Timeout waiting for hardware interrupt.

[ 8424.024115] mmc0: Timeout waiting for hardware interrupt.

[ 8434.034013] mmc0: Timeout waiting for hardware interrupt.

[ 8444.043928] mmc0: Timeout waiting for hardware interrupt.

[ 8454.053814] mmc0: Timeout waiting for hardware interrupt.

[ 8464.063693] mmc0: Timeout waiting for hardware interrupt.

рестартирах за протокола и картата оживя. Лепи се на декстопа и някакво графично приложение ми предлага своите услуги, вижда се и в файловия мениджър. Сега мога да правя всичко с нея, извада ли я - край, само рестарт я вдига от мъртвите.

Редактирано 1 декември 201213 г. от Profruit (преглед на промените)

Юсбтата ок ама карта я пробвай grep -i CONFIG_MMC_SDHCI_PCI /coot/config-$(uname -r) и това grep -i CONFIG_SCSI_MULTI_LUN /boot/config-$(uname -r) и това като boot параметър на grub acpi=off

Редактирано 1 декември 201213 г. от tux (преглед на промените)

profruit@proacer / $ grep -i CONFIG_MMC_SDHCI_PCI /coot/config-$(uname -r)

grep: /coot/config-3.5.0-17-generic: No such file or directory

profruit@proacer / $ grep -i CONFIG_SCSI_MULTI_LUN /boot/config-$(uname -r)

CONFIG_SCSI_MULTI_LUN=y

Ако съм разбрал правилно

/boot/grub/grub.cfg няма grub acpi=

#

# DO NOT EDIT THIS FILE

#

# It is automatically generated by grub-mkconfig using templates

# from /etc/grub.d and settings from /etc/default/grub

#

### BEGIN /etc/grub.d/00_header ###

if [ -s $prefix/grubenv ]; then

set have_grubenv=true

load_env

fi

set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then

menuentry_id_option="--id"

else

menuentry_id_option=""

fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then

set saved_entry="${prev_saved_entry}"

save_env saved_entry

set prev_saved_entry=

save_env prev_saved_entry

set boot_once=true

fi

function savedefault {

if [ -z "${boot_once}" ]; then

saved_entry="${chosen}"

save_env saved_entry

fi

}

function recordfail {

set recordfail=1

if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi

}

function load_video {

if [ x$feature_all_video_module = xy ]; then

insmod all_video

else

insmod efi_gop

insmod efi_uga

insmod ieee1275_fb

insmod vbe

insmod vga

insmod video_bochs

insmod video_cirrus

fi

}

if [ x$feature_default_font_path = xy ] ; then

font=unicode

else

insmod part_msdos

insmod ext2

set root='hd0,msdos7'

if [ x$feature_platform_search_hint = xy ]; then

search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 1cd7560d-17f2-4d82-a595-a252d502fb8e

else

search --no-floppy --fs-uuid --set=root 1cd7560d-17f2-4d82-a595-a252d502fb8e

fi

font="/usr/share/grub/unicode.pf2"

fi

if loadfont $font ; then

set gfxmode=auto

load_video

insmod gfxterm

set locale_dir=$prefix/locale

set lang=en_US

insmod gettext

fi

terminal_output gfxterm

if [ "${recordfail}" = 1 ]; then

set timeout=-1

else

set timeout=10

fi

### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###

set menu_color_normal=white/black

set menu_color_highlight=black/light-gray

### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###

set menu_color_normal=white/black

set menu_color_highlight=white/light-gray

### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###

function gfxmode {

set gfxpayload="$1"

if [ "$1" = "keep" ]; then

set vt_handoff=vt.handoff=7

else

set vt_handoff=

fi

}

if [ ${recordfail} != 1 ]; then

if [ -e ${prefix}/gfxblacklist.txt ]; then

if hwmatch ${prefix}/gfxblacklist.txt 3; then

if [ ${match} = 0 ]; then

set linux_gfx_mode=keep

else

set linux_gfx_mode=text

fi

else

set linux_gfx_mode=text

fi

else

set linux_gfx_mode=keep

fi

else

set linux_gfx_mode=text

fi

export linux_gfx_mode

if [ "$linux_gfx_mode" != "text" ]; then load_video; fi

menuentry 'Linux Mint 14 MATE 64-bit, 3.5.0-17-generic (/dev/sda7)' --class linuxmint --class gnu-linux --class gnu --class os {

recordfail

gfxmode $linux_gfx_mode

insmod gzio

insmod part_msdos

insmod ext2

set root='hd0,msdos7'

if [ x$feature_platform_search_hint = xy ]; then

search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 1cd7560d-17f2-4d82-a595-a252d502fb8e

else

search --no-floppy --fs-uuid --set=root 1cd7560d-17f2-4d82-a595-a252d502fb8e

fi

linux /boot/vmlinuz-3.5.0-17-generic root=UUID=1cd7560d-17f2-4d82-a595-a252d502fb8e ro quiet splash acpi_backlight=vendor $vt_handoff

initrd /boot/initrd.img-3.5.0-17-generic

}

#menuentry 'Linux Mint 14 MATE 64-bit, 3.5.0-17-generic (/dev/sda7) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {

# recordfail

# insmod gzio

# insmod part_msdos

# insmod ext2

# set root='hd0,msdos7'

# if [ x$feature_platform_search_hint = xy ]; then

# search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 1cd7560d-17f2-4d82-a595-a252d502fb8e

# else

# search --no-floppy --fs-uuid --set=root 1cd7560d-17f2-4d82-a595-a252d502fb8e

# fi

# echo 'Loading Linux 3.5.0-17-generic ...'

# linux /boot/vmlinuz-3.5.0-17-generic root=UUID=1cd7560d-17f2-4d82-a595-a252d502fb8e ro recovery nomodeset

# echo 'Loading initial ramdisk ...'

# initrd /boot/initrd.img-3.5.0-17-generic

#}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###

### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###

#menuentry "Memory test (memtest86+)" {

# insmod part_msdos

# insmod ext2

# set root='hd0,msdos7'

# if [ x$feature_platform_search_hint = xy ]; then

# search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 1cd7560d-17f2-4d82-a595-a252d502fb8e

# else

# search --no-floppy --fs-uuid --set=root 1cd7560d-17f2-4d82-a595-a252d502fb8e

# fi

# linux16 /boot/memtest86+.bin

#}

#menuentry "Memory test (memtest86+, serial console 115200)" {

# insmod part_msdos

# insmod ext2

# set root='hd0,msdos7'

# if [ x$feature_platform_search_hint = xy ]; then

# search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 1cd7560d-17f2-4d82-a595-a252d502fb8e

# else

# search --no-floppy --fs-uuid --set=root 1cd7560d-17f2-4d82-a595-a252d502fb8e

# fi

# linux16 /boot/memtest86+.bin console=ttyS0,115200n8

#}

### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###

#menuentry 'Windows Recovery Environment (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-DC66FDEE66FDC8F2' {

# insmod part_msdos

# insmod ntfs

# set root='hd0,msdos1'

# if [ x$feature_platform_search_hint = xy ]; then

# search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 DC66FDEE66FDC8F2

# else

# search --no-floppy --fs-uuid --set=root DC66FDEE66FDC8F2

# fi

# drivemap -s (hd0) ${root}

# chainloader +1

#}

menuentry 'Windows 7 (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-AA30FE6830FE3B41' {

insmod part_msdos

insmod ntfs

set root='hd0,msdos2'

if [ x$feature_platform_search_hint = xy ]; then

search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 AA30FE6830FE3B41

else

search --no-floppy --fs-uuid --set=root AA30FE6830FE3B41

fi

chainloader +1

}

### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###

### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###

# This file provides an easy way to add custom menu entries. Simply type the

# menu entries you want to add after this comment. Be careful not to change

# the 'exec tail' line above.

### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###

if [ -f ${config_directory}/custom.cfg ]; then

source ${config_directory}/custom.cfg

elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then

source $prefix/custom.cfg;

fi

### END /etc/grub.d/41_custom ###

Редактирано 1 декември 201213 г. от Profruit (преглед на промените)